PDA

View Full Version : Flying the Bf 110



drronnie
Mar-11-2015, 20:45
Are there any good missions which I can use to learn to take off, fly and land the Me 110 without interference from enemies. I can already take off but still need to learn how to navigate back to base and land.

b0czek
Mar-12-2015, 06:06
I think you can always go online and select distant airfield. Join teamspeak for immersion and do your practices. :)

5./JG26_Peete
Mar-12-2015, 07:02
Pres...keys.. tab 7 2. And you are getting the vectors to youre airfield.!!

b0czek
Mar-12-2015, 09:51
... and regarding navigation, this might be worth of look: https://www.youtube.com/watch?v=hGDUC5lTvJY

drronnie
Mar-13-2015, 00:58
anyway how I can get the plane to stop spinning on the runway when going full throttle on both engine. I try to use the rudder to steer but it wont work either. Thanks

ATAG_Ezzie
Mar-13-2015, 01:41
anyway how I can get the plane to stop spinning on the runway when going full throttle on both engine. I try to use the rudder to steer but it wont work either. Thanks

If its spinning then that suggests one engine is at full throttle and the other is at idle. Check the rpm to make sure both are the same. If not you need to make sure you have selected both engines before advancing the throttle. Hardegens post in the other thread explains how u can do this.

Otherwise if both are full then another possibility is that one of your wheels is broken ( maybe after a hard landing) or one of your wheel brakes is on full. Check to make sure both brakes are off.

Hopefully it's one of these.

Osprey
Mar-13-2015, 03:43
And check our flight school, there are a couple of Bf110 pointers there

http://www.aircombatgroup.co.uk/flight_school/flight_school.php?section=2#nav


If you want to fly with a lot of other Bf110 pilots then there are 2 crews I know of, Ezzie's chaps, and we have a full staffel in ACG
http://www.aircombatgroup.co.uk/squadrons/6zg76.php

I can't think of anything much more fun than flying heavies like this in a big pack! :thumbsup: TBH mate you'll get the best training from flying with other. I'm sure our lads will be happy to show you how it all works, no obligation to join, just drop by if you want.

drronnie
Mar-13-2015, 04:04
Thanks for this. The tutorial video by Apeoftheyear is very good. Will watch and study throughly tonight

b0czek
Mar-13-2015, 18:58
Take a look into Team Fusion wiki also:
http://www.theairtacticalassaultgroup.com/wiki/doku.php?id=bf110c

1lokos
Mar-13-2015, 19:20
Select any QM offline, switch the plane for Bf 110 and using the "radio": TAB > 7 > 2 ask for bearing to home base.
All these QM has a defined home base to land.

drronnie
Mar-15-2015, 20:10
If its spinning then that suggests one engine is at full throttle and the other is at idle. Check the rpm to make sure both are the same. If not you need to make sure you have selected both engines before advancing the throttle. Hardegens post in the other thread explains how u can do this.

Otherwise if both are full then another possibility is that one of your wheels is broken ( maybe after a hard landing) or one of your wheel brakes is on full. Check to make sure both brakes are off.

Hopefully it's one of these.

Thanks. I think the problem is with the brakes as I because before I throttle I put the left and the right brake to zero. Half of the time it works and I manage a straight take off. However sometimes the brakes are on 0% and it's still spins.
Same thing happens when I try to take off the 109