Runtime error launcher.exe not working

[Dooleybird]

Hello,

I am new here maybe somebody can help me?

Everytime i try to connect with the ATAG server i get a runtome error and than the launcher.exe stops working

on other server i have no problem

Any ideas?

Thanks

[92 Sqn. Philstyle (QJ-P)]

Are you running 64-bit windows?

[Dooleybird]

Are you running 64-bit windows?

no 32 bit windows

[ATAG_Deacon]

~S~ Dooley,

Welcome to the Forum!

I had the same issue after the last patch. I removed MSI Afterburner and TS Notifier from my system and have not had an issue since.

Hope you find the solution for your system!


Deacon

[Dooleybird]

~S~ Dooley,

Welcome to the Forum!

I had the same issue after the last patch. I removed MSI Afterburner and TS Notifier from my system and have not had an issue since.

Hope you find the solution for your system!


Deacon

Thanks but I don't have MSI afterburner installed and also no TS notifier. Any other suggestions!

Can only play the small maps online ..which is good for target practice

any help is welccme !!

[ATAG_Colander]

no 32 bit windows

XP or Windows 7?

[Dooleybird]

XP or Windows 7?

Windows 7

[Dooleybird]

Windows 7

Any help can only play small maps online like the dogfight with external views etc etc

when trying ATAG server or spits versus 109 i get timeout error and launch.exe error

PLEASE help

[ATAG_Colander]

Dooleybird,

Please do this:
-Enable logging in the conf.ini by setting LOG=1
-Run the game so you get the error
-ZIP and attach here the log file and the latest dump file.

Thx,
Colander.

[Dooleybird]

Dooleybird,

Please do this:
-Enable logging in the conf.ini by setting LOG=1
-Run the game so you get the error
-ZIP and attach here the log file and the latest dump file.

Thx,
Colander.


log file is

------------ BEGIN log session -------------
Load landscape...
Load bridges
LongBridge: wrong width. (3)
Load static objects...
Battle starting...


just those 5 lines

[ATAG_Bliss]

Hi Dooley,

Can you copy/paste your config here?

I'm wondering if something's a miss with your settings.

[Dooleybird]

Hi Dooley,

Can you copy/paste your config here?

I'm wondering if something's a miss with your settings.

config.ini

[BOB]
EpilepsyFilter=1

[window]
DepthBits =24
StencilBits=8
DrawIfNotFocused=0
SaveAspect=0
Render=D3D10_0
width=1920
height=1080
posLeft=0
posTop=0
ColourBits=32
FullScreen=1
ChangeScreenRes=1
Frequency=60
StereoMode=0

[NET]
speed=100000
localPort=27015
serverName=My Server
serverDescription=IL-2 Sturmovik: Cliffs of Dover
serverInfo1=
serverInfo2=
serverInfo3=
serverInfo4=
VAC=1
maxPlayers=255
socksEnable=0
socksHost=
socksPort=1080
socksUser=
socksPwd=
host=84.17.22.14
port=27016

[Console]
IP=20001
UseStartLog=1
WRAP=1
PAUSE=1
HISTORY=1024
HISTORYCMD=1024
PAGE=20
LOG=0
LOGTIME=0
LOAD=console.cmd
SAVE=console.cmd
LOGFILE=log.txt
LOGKEEP=0

[rts]
; 0 - not use, 1 - show cursor and not capture, 2 - not show cursor, and capture
mouseUse=2
; 0 - not use, 1 - use if hardware exist
joyUse=1
; 0 - not use, 1 - use if hardware exist
trackIRUse=1

[rts_mouse]
SensitivityX=1.0
SensitivityY=1.0
SensitivityZ=1.0
Invert=0
SwapButtons = 0

[rts_joystick]
FF=1

[core]
RandSeed = 0
TexQual=2
TexFlags.PolygonStipple=0
Shadows=1
SpecularLight=2
DiffuseLight=2
DynamicalLights=1
MeshDetail=2
LandShading=2
LandDetails=2
Sky=3
Forest=3
VisibilityDistance=3
LandGeom=2
DrawCollisions=1
Water=-1
Effects=2
EffFlags.Light=1
EffFlags.SpriteRender=0
Grass=3
CordEffect=1
UseFog=0
UseLandCube=1
UseLandConnectedObject=1
LinearObjectManager=1
Roads=1
Sun=1
Clouds=1
EffFlags.LightSpritesProj=1
ShadowMapSize=5
TexFlags.AsyncLoad=1
TexFlags.ShowTexture=0
SimpleMesh.SWTransform=0
SimpleMesh.QuadTreeClip=1
SimpleMesh.InstancingHW=1
EffFlags.LightContextSprites=1
CloudsFlags.Detailed=1
TexFlags.CreateHDR=1
Decals=2
EffFlags.SWLight=0
TexFlags.CockpitOnePass=0
MegaTexture=0
TexFlags.Reflection=0
RenderTargetQual=3
MSAA=0
MeshStatics=2
MeshStaticsDetail=3
SimpleMesh.QTNoCompose=0
MeshFirstLod=0
MeshShowLod=0
SpawnHumans=0
TexFlags.SSAO=1
TexFlags.VSync=0
TexFlags.FastTransparency=1

[sound]
SoundUse=1
DebugSound=0
SoundEngine=1
Speakers=1
Placement=0
SoundFlags.reversestereo=0
RadioFlags.Enabled=1
RadioEngine=2
MusicVolume=14
ObjectVolume=7
MusState.takeoff=1
MusState.inflight=1
MusState.crash=1
MusFlags.play=1
MasterVolume=14
Attenuation=7
SoundMode=0
SamplingRate=0
NumChannels=2
SoundExt.occlusions=1
SoundFlags.hardware=1
SoundFlags.streams=1
SoundFlags.duplex=1
SoundExt.acoustics=1
SoundExt.volumefx=1
SoundFlags.voicemgr=1
SoundFlags.static=1
VoiceVolume=8
Channels=1
SoundFlags.bugscorrect=0
SoundExt.extrender=0
SoundSetupId=8
ActivationLevel=0.02
Preemphasis=0.8
RadioLatency=0.5
AGC=1
PTTMode=1
RadioFlags.PTTMode=0
RadioFlags.PlayClicks=1
ActLevel=9
MicLevel=10
SoundFlags.UseRadioChatter=0
SoundFlags.AutoActivation=0
SoundFlags.forceEAX1=0
speakers=1
vgMaster=15
vgMusic=15
vgVoice=15

[game]
mirror=0
mapPadX=0.05
mapPadY=0.1
mapPadDX=0.35
mapPadDY=0.6

AND BLDconfig.ini

[builder config]
bShowBattleArea 0
bViewBridge 0
iconSize 16
bSaveViewHLand 0
bShowLandscape 1
bShow3D 1
iLightLand 128
iLightDestruction 128
bShowGrid 0
bAnimateCamera 1
bFitObjects 1
bActorOnLand 1
bEnableSelect 1
bSmoothShipPath 0
bViewRunaway 1
bShowName 1
bShowTime 1
bShowArmy0 1
bShowArmy1 1
bShowArmy2 1
bShowArmy3 1
bShowArmy4 1
bShowArmy5 1
bShowArmy6 1
bShowArmy7 1
bShowArmy8 1
bShowArmy9 1
bShowArmy10 1
bShowArmy11 1
bShowArmy12 1
bShowArmy13 1
bShowArmy14 1
bShowArmy15 1
bShowArmy16 1
iWaterLevel 191

[Dooleybird]

Hello,

Can anybody give a solution the the problem not logging online game with big maps which results in runtime error?

Thanks

[92 Sqn. Philstyle (QJ-P)]

Hello,

Can anybody give a solution the the problem not logging online game with big maps which results in runtime error?

Thanks

There is no solution. As far as I can tell it is 32-bit Windows users who have this issue.
One of our guys is running 32-bit win 7. He cannot connect to ATAG either. He can only just connect to ACG server (also uses channel map), but gets a high number of launcher crashes.

[thee_oddball]

Hello,

I am new here maybe somebody can help me?

Everytime i try to connect with the ATAG server i get a runtome error and than the launcher.exe stops working

on other server i have no problem

Any ideas?

Thanks

is this a fresh install or is this layers of updates? what is the windows code you are getting when it crashes?

[ATAG_Septic]

config.ini

[BOB]
EpilepsyFilter=1



Try turning the Epilepsy Filter off (assuming you don't need it of course). You don't need to edit the config file it can be done via the in-game video options screen.

Cheers,

Septic.

[Dooleybird]

Sorry not working it keeps loading ..no error

cant understand, it is ok to play the small maps even map of france !

do i need new pc or just settings ..hehe?

[ATAG_Bliss]

What are your pc specs? Videocard, CPU, RAM?

[thee_oddball]

Sorry not working it keeps loading ..no error

cant understand, it is ok to play the small maps even map of france !

do i need new pc or just settings ..hehe?


when this is happening do you see your HD light flickering? what i would suggest is that you unistall the ENTIRE game including all files and folders in "my documents" and do a fresh install, if you get the same error than we may assume it is something on your PC that is caising the problem such as anti virus, corupt directx/.NET ...etc

[Dooleybird]

Hello,

I did an fresh install, but no luck. What i dont understand, i can play the the small maps online and even battle of france which also use the channel map.

but atag server and spit vs 109 and some other big maps results in launch.exe error!

i have directx 11 is set it in the config.ini to 9 also no luck
i have avira virus scann also when turned off no luck

i use nivdia 660 ti 3gb so
internal ram 4 gb Q6600 system (2,5 ghz)

so offline and on some online masp it runs very well!

pfff... other options?

[Dooleybird]

launch not working

error message
Probleemhandtekening:
Gebeurtenisnaam van probleem: CLR20r3
Probleemhandtekening 01: launcher.exe
Probleemhandtekening 02: 1.0.0.0
Probleemhandtekening 03: 4d6e3d08
Probleemhandtekening 04: core
Probleemhandtekening 05: 1.0.0.0
Probleemhandtekening 06: 507eb270
Probleemhandtekening 07: 96e
Probleemhandtekening 08: 0
Probleemhandtekening 09: System.AccessViolationException
Versie van besturingssysteem: 6.1.7601.2.1.0.256.1
Landinstelling-id: 1043
Aanvullende informatie 1: 0a9e
Aanvullende informatie 2: 0a9e372d3b4ad19135b953a78882e789
Aanvullende informatie 3: 0a9e
Aanvullende informatie 4: 0a9e372d3b4ad19135b953a78882e789

Lees de onlineprivacyverklaring:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0413

Als de onlineprivacyverklaring niet beschikbaar is, lees dan onze offlineprivacyverklaring:
C:\Windows\system32\nl-NL\erofflps.txt

[Dooleybird]

What are your pc specs? Videocard, CPU, RAM?

Intel core Quad Q6600 2,4 ghz
RAM 4gb
32 -system
Nvidia 660 ti 3gb

[thee_oddball]

launch not working

error message
Probleemhandtekening:
Gebeurtenisnaam van probleem: CLR20r3
Probleemhandtekening 01: launcher.exe
Probleemhandtekening 02: 1.0.0.0
Probleemhandtekening 03: 4d6e3d08
Probleemhandtekening 04: core
Probleemhandtekening 05: 1.0.0.0
Probleemhandtekening 06: 507eb270
Probleemhandtekening 07: 96e
Probleemhandtekening 08: 0
Probleemhandtekening 09: System.AccessViolationException
Versie van besturingssysteem: 6.1.7601.2.1.0.256.1
Landinstelling-id: 1043
Aanvullende informatie 1: 0a9e
Aanvullende informatie 2: 0a9e372d3b4ad19135b953a78882e789
Aanvullende informatie 3: 0a9e
Aanvullende informatie 4: 0a9e372d3b4ad19135b953a78882e789

Lees de onlineprivacyverklaring:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0413

Als de onlineprivacyverklaring niet beschikbaar is, lees dan onze offlineprivacyverklaring:
C:\Windows\system32\nl-NL\erofflps.txt




AccessViolationException Class

.NET Framework 4.5
The exception that is thrown when there is an attempt to read or write protected memory.

System.AccessViolationException points to .NET and Problem Signature 04 points to the engine core, try the suggestion below by Mr Dawg and let us know if that fix's the problem


Hey Guys, Got 2 things worked like a charm, no stutters , no slide show for ati an nvidea users .

Win7 USERS

.1 click START ^ Control panel ^ Programs ^ Programs an Features Go to Microsoft. NET Framework 4 Client Profile. double click on it , An repair it , After repair it will ask restart your computer, do it

.2 Then go to C PROGRAM FILES X86/ Steamapps/common/il-2 sturmovik cliffs of dover/redist/DirectX/ Scroll down til you see DXSETUP Double click on it , an run it!!

For they guys that did this , THE CHEERING SECTION IS OUT, All of ur had the same results. NO SLIDE SHOW NOT A STUTTER. Even with 3 spits an 7 or 8 109s at 1000 feet above the the 3 base close together north of the French point ( our normal slide show, Repeated 3 times , Stayed hard on 60 fps an high 75 my vsync on all setting high an original , For the first time since i bought this game , it was amazing!!! If this helps tell others ( for me an several others who did this ) All i can say is WOW !!! :P :geek: :PP

[ATAG_JTDawg]

i could be wrong an that might help, as it still helps me. But AMD had a beta ccc an driver for vid card an i had what you are describing, there was 2 of them 1 for net frame work 4.0 an the other supported 4.5 i did the 4.5 beta an boom broke it, many hours to fix had to uninstall an get right version working, an getting rid of any old drivers an ccc as i had many ) in folder it wanted to install next best driver if you know what i mean . an maybe someone could answer but , not sure but it really sounds like a bad install on driver an set up for vid card or something in the 4.0 4.5 but do post above first, as it is pretty quik

[ATAG_Snapper]

Thanks, thee_oddball, for providing JTDawg's tips. I added it to JTDawg's original post over in this forum's "technical" section and stickied that thread for easier reference:

http://theairtacticalassaultgroup.com/forum/showthread.php?1806-If-you-have-not-tried-this-please-do&p=14874&viewfull=1#post14874

[Dooleybird]

System.AccessViolationException points to .NET and Problem Signature 04 points to the engine core, try the suggestion below by Mr Dawg and let us know if that fix's the problem

ok repair frame net restart then install directx did some good ..i see the screen and map where you can select the flags for playing ..BUT THEN again launch.exe

with the error message:

Probleemhandtekening:
Gebeurtenisnaam van probleem: APPCRASH
Naam van de toepassing: Launcher.exe_Launcher
Versie van toepassing: 1.0.0.0
Tijdstempel van toepassing: 4d6e3d08
Naam van foutmodule: d3d10core.dll
Versie van foutmodule: 6.1.7600.16385
Tijdstempel van foutmodule: 4a5bd9a3
Uitzonderingscode: c0000005
Uitzonderingsmarge: 00025b2c
Versie van besturingssysteem: 6.1.7601.2.1.0.256.1
Landinstelling-id: 1043
Aanvullende informatie 1: 0a9e
Aanvullende informatie 2: 0a9e372d3b4ad19135b953a78882e789
Aanvullende informatie 3: 0a9e
Aanvullende informatie 4: 0a9e372d3b4ad19135b953a78882e789

Lees de onlineprivacyverklaring:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0413

Als de onlineprivacyverklaring niet beschikbaar is, lees dan onze offlineprivacyverklaring:
C:\Windows\system32\nl-NL\erofflps.txt

hoperfully a fix for this??

[Dooleybird]

Hello,

Well i was also installing DCS A-10 ..and also runtime error !!

At there forum was a solution for win 32 systems to increase memory hack

Do following;

type bcdedit /set increaseuserva 3072 and press enter

edit: you may need to temporarily disable UAC/run as administrator for this to work

edit 2: if you wish to reverse this command back to default, simply use "bcdedit /deletevalue increaseuserva"

So finally could logon to ATAG server an took off!!! so ithink it is SOLVED


So watch out now ..Dooleybird will be around flying now on ATAG server ..hehe !!

[ATAG_JTDawg]

glad ya got it going :thumbsup:

[thee_oddball]

Hello,

Well i was also installing DCS A-10 ..and also runtime error !!

At there forum was a solution for win 32 systems to increase memory hack

Do following;

type bcdedit /set increaseuserva 3072 and press enter

edit: you may need to temporarily disable UAC/run as administrator for this to work

edit 2: if you wish to reverse this command back to default, simply use "bcdedit /deletevalue increaseuserva"

So finally could logon to ATAG server an took off!!! so ithink it is SOLVED


So watch out now ..Dooleybird will be around flying now on ATAG server ..hehe !!

when i first heard it was a 32bit system i thought maybe it is a memory issue and was going to suggest LAA (Large Address Aware) A program that allows a 32bit OS to use more than 2GB of ram, but thought naaaaah some one would have sorted that out already.....next time ill go with my gut :) here is the program for any one runinng a 32bit OS with atleast 3GB of ram.
http://www.techpowerup.com/forums/showthread.php?t=112556

[Dooleybird]

Hehe no problem!

[Geier]

I had the same problem and also in Win7 32bit. Checking the integrity of the cache in steam preferences helped me. Steam downloaded some stuff and all is ok now. But it' doesn't help with spit 2 issue :(