Patch 4.55 - Bf109-E trim indicator display

[varrattu]

Thank you for the hard work Team Fusion!

Unfortunately the Bf109 trim indicator display still does't work correct:

https://theairtacticalassaultgroup.com/forum/attachment.php?attachmentid=38555&d=1551720520

The Bf109 trim indicator gear train should work as follows .

The driving gear is mounted to a shaft including a -smaller- second gear. The driven gear is mounted to the trim indicator.

When the driving gear moves clockwise (nose down) the driven gear rotates the trim indicator anticlockwise from 1° to 3°.

When the driving gear moves anticlockwise (tail down) the driven gear rotates the trim indicator clockwise from -1° to -8°.

https://theairtacticalassaultgroup.com/forum/attachment.php?attachmentid=38556&d=1551720616

:salute: ~V~

[Tibsun]

I have a question for you.
Once the stabilizer reaches the marker (on the tail skin), not going all the way, is it normal that the elevator moves the max possible trim?
Because I think the elevator shouldn't move with the stabilizer trim. But then again, it's the controls for "elevator" in clod.