Royraiden
Mar-06-2013, 14:57
Well after getting my joystick working properly, I now moved to the throttle and its axes.I have assigned the elevator trim to the scroll wheel in the back without problems.Now I assigned rudder trim to the big rotary on the top and while Im mostly fine with it, the response is too sensitive, the same happens with the other much smaller rotary on the right side of the throttle and the wheel on my CH combatstick.Deadzones are all at 0 and the sensitivities of all these axes are set to 1 in game.
The problem Im having with all this is that only about 30% of the actual movement of those axes are recognized ,this in turn makes fine movements incredibly difficult or even impossible.I downloaded a program called IL2 Joy intended for 1946 but I dont know if it could be used with Cliff of Dover.
The problem Im having with all this is that only about 30% of the actual movement of those axes are recognized ,this in turn makes fine movements incredibly difficult or even impossible.I downloaded a program called IL2 Joy intended for 1946 but I dont know if it could be used with Cliff of Dover.