Page 2 of 2 FirstFirst 12
Results 31 to 57 of 57

Thread: TSNotifier for Beginners [Definitive Guide]

  1. #31
    Supporting Member TWC_SLAG's Avatar
    Join Date
    Jan 2013
    Location
    League City, TX
    Posts
    658
    Post Thanks / Like
    Total Downloaded
    938.40 MB

    Re: TSNotifier for Beginners [Definitive Guide]

    Do you have Overlay Enabled? Doing that is what made it work for me.

    badfinger
    Win 10 64 bit, 2T Hard Drive, 1T SSD, 500GB SSD, Gigabyte Z390 M Gaming MB,
    Intel i9 9900 Coffee Lake 31ghz CPU, EVGA 2070 Super GPU, 32gb DDR4 Ram,
    Track IR5, 32” Gigabyte Curved Monitor 165hz, TM Warthog HOTAS, CH Pedals, Voice Attack, Reverb G2

    League City, TX

  2. #32
    Novice Pilot
    Join Date
    Sep 2015
    Posts
    84
    Post Thanks / Like
    Total Downloaded
    3.21 MB

    Re: TSNotifier for Beginners [Definitive Guide]

    Quote Originally Posted by 71st_AH_badfinger View Post
    Do you have Overlay Enabled? Doing that is what made it work for me.

    badfinger
    That did work but, TS notifier crashes when starting clod.

  3. #33
    Supporting Member DoubleStandards's Avatar
    Join Date
    Dec 2013
    Location
    Phoenix, Arizona
    Posts
    348
    Post Thanks / Like
    Total Downloaded
    282.89 MB

    Re: TSNotifier for Beginners [Definitive Guide]

    Quote Originally Posted by rowns View Post
    That did work but, TS notifier crashes when starting clod.
    I believe you have to start up TS Notifier after you start Cliffs.

    DS

  4. #34
    Novice Pilot
    Join Date
    Sep 2015
    Posts
    84
    Post Thanks / Like
    Total Downloaded
    3.21 MB

    Re: TSNotifier for Beginners [Definitive Guide]

    Quote Originally Posted by DoubleStandards View Post
    I believe you have to start up TS Notifier after you start Cliffs.

    DS
    Thank you very much, I haven't tried it yet but it I believe that it works.

  5. #35
    shadepiece
    Guest

    Re: TSNotifier for Beginners [Definitive Guide]

    THANK YOU!! This got me up, and running very fast. I wish this thread was a bit easier to find. I had to do some searching. If it's not already, it should be "stickyed"!

  6. #36
    Banned
    Join Date
    Jun 2014
    Location
    Burton MI USA
    Posts
    61
    Post Thanks / Like
    Total Downloaded
    0

    Re: TSNotifier for Beginners [Definitive Guide]

    Turn,
    >S<
    Thank you for the definitive guide for dummies. I was running the wrong TS version and was going out of my mind. Then do what everyone does as a last resort...READ THE DIRECTIONS!! I was running version 3.0.13.1 of TS not 3.0.16. After reading and getting the correct version, re-followed the directions and damn it works.

    Thank you for your service to the community.
    >S<

  7. #37
    Student Pilot FubarBrickdust's Avatar
    Join Date
    Jun 2016
    Location
    London
    Posts
    6
    Post Thanks / Like
    Total Downloaded
    0

    Re: TSNotifier for Beginners [Definitive Guide]

    Nice one, Turn!

    I'm brand new to CloD - Been trying to get some sort of overlay working in-game to help out with the confusion of who's who on TS. Everything's failed...until now! Works like a charm.

    Cheers

  8. #38
    Combat pilot
    Join Date
    Jun 2016
    Location
    UK
    Posts
    137
    Post Thanks / Like
    Total Downloaded
    116.50 MB

    Re: TSNotifier for Beginners [Definitive Guide]

    Going to try this tonight I think... anyone notice any FPS Hit ???

  9. #39
    Ace Erpr.Gr.210_Mölders's Avatar
    Join Date
    Dec 2015
    Location
    Italy
    Posts
    2,450
    Post Thanks / Like
    Total Downloaded
    1,002.26 MB

    Re: TSNotifier for Beginners [Definitive Guide]

    Anyone knows if the notifier works in conjunction with the last Ts update ( version 3.0.19.1 )?
    Visit the Robert Mölders Facebook Group ( Left-click on the red link on the left to open the relative page! )
    Visit the Robert Mölders YouTube Channel ( Left-click on the red link on the left to open the relative page! )
    *Important Note: You can also open the Robert Mölders Facebook Group page by clicking directly on my signature image


    My PC specs
    Windows 10 Pro 64 bit ~ Intel Core i7-7700K 4.2GHz 8MB Cache Quad core
    ASUS ROG STRIX Z270H GAMING Motherboard, Socket 1151 ATX, Dual M.2, USB 3.1 Type-C ~ MSI GeForce GTX 1080 TI Gaming X 11G Graphic Card PCIE 3.0, 11 GB, GDDR5X 352 bit, 11.01 GHz, 1569 MHz
    Samsung MZ-V6E250BW SSD 960 EVO, 250 GB, M.2, NVMe ~ Western Digital WD Caviar Blue 2TB 64MB Cache, WD20EZRZ (64MB Cache) ~ Enermax Liqmax II 240 (ELC-LMR240S-BS)
    Corsair CMK16GX4M2B3000C15 Vengeance LPX RAM 16 GB, 2x8 GB, DDR4, 3000 MHz, CL15 ~ EVGA SuperNOVA GQ PSU 750W ~ NZXT CA-N450W-M1 Case for Gaming PC, Black
    LG 49UK6200PLA TV 49" 4K UltraHD, IPS Display, 4096 x 2160, Active HDR, Multitasking ~ LG 27UD68P Monitor 27" 4K UltraHD LED IPS, 3840 x 2160, AMD FreeSync, Multitasking
    Thrustmaster T.16000M FCS Joystick ~ Thrustmaster TWCS Throttle ~ Thrustmaster TFRP Pedals

  10. #40
    Combat pilot
    Join Date
    Jun 2016
    Location
    UK
    Posts
    137
    Post Thanks / Like
    Total Downloaded
    116.50 MB

    Re: TSNotifier for Beginners [Definitive Guide]

    Quote Originally Posted by Stab I./JG 51 - Mölders View Post
    Anyone knows if the notifier works in conjunction with the last Ts update ( version 3.0.19.1 )?
    From what I understand it's important you only use the version noted in the first post..

  11. Likes Erpr.Gr.210_Mölders liked this post
  12. #41
    Supporting Member 9./JG26_Brigg's Avatar
    Join Date
    Sep 2012
    Location
    England
    Posts
    133
    Post Thanks / Like
    Total Downloaded
    2.9 KB

    Re: TSNotifier for Beginners [Definitive Guide]

    using version 3.0.19.1 here with no problems
    Asus RE4, i7 4820k@4.5, 16gb kingston hyperx, gtx 980, 480gb samsung 840 evo for win10 + games, full custom loop, warthog hotas, saitek pedals, asus rog swift and because that is how i roll.

  13. Likes Erpr.Gr.210_Mölders liked this post
  14. #42
    Ace Erpr.Gr.210_Mölders's Avatar
    Join Date
    Dec 2015
    Location
    Italy
    Posts
    2,450
    Post Thanks / Like
    Total Downloaded
    1,002.26 MB

    Re: TSNotifier for Beginners [Definitive Guide]

    Quote Originally Posted by 9./JG26_Brigg View Post
    using version 3.0.19.1 here with no problems
    Thanks a lot for the info!
    Visit the Robert Mölders Facebook Group ( Left-click on the red link on the left to open the relative page! )
    Visit the Robert Mölders YouTube Channel ( Left-click on the red link on the left to open the relative page! )
    *Important Note: You can also open the Robert Mölders Facebook Group page by clicking directly on my signature image


    My PC specs
    Windows 10 Pro 64 bit ~ Intel Core i7-7700K 4.2GHz 8MB Cache Quad core
    ASUS ROG STRIX Z270H GAMING Motherboard, Socket 1151 ATX, Dual M.2, USB 3.1 Type-C ~ MSI GeForce GTX 1080 TI Gaming X 11G Graphic Card PCIE 3.0, 11 GB, GDDR5X 352 bit, 11.01 GHz, 1569 MHz
    Samsung MZ-V6E250BW SSD 960 EVO, 250 GB, M.2, NVMe ~ Western Digital WD Caviar Blue 2TB 64MB Cache, WD20EZRZ (64MB Cache) ~ Enermax Liqmax II 240 (ELC-LMR240S-BS)
    Corsair CMK16GX4M2B3000C15 Vengeance LPX RAM 16 GB, 2x8 GB, DDR4, 3000 MHz, CL15 ~ EVGA SuperNOVA GQ PSU 750W ~ NZXT CA-N450W-M1 Case for Gaming PC, Black
    LG 49UK6200PLA TV 49" 4K UltraHD, IPS Display, 4096 x 2160, Active HDR, Multitasking ~ LG 27UD68P Monitor 27" 4K UltraHD LED IPS, 3840 x 2160, AMD FreeSync, Multitasking
    Thrustmaster T.16000M FCS Joystick ~ Thrustmaster TWCS Throttle ~ Thrustmaster TFRP Pedals

  15. #43
    ATAG Member ATAG_Highseas's Avatar
    Join Date
    Feb 2016
    Location
    Peurto del Slade, UK
    Posts
    6,244
    Post Thanks / Like
    Total Downloaded
    571.41 MB

    Re: TSNotifier for Beginners [Definitive Guide]

    Quote Originally Posted by 9./JG26_Brigg View Post
    using version 3.0.19.1 here with no problems
    I just did this last night using the latest versions of teamspeak and teamspeak notifier.

    All works as it should.

    Run Clod before starting up the notifier.... (as it says in the original post) or the launcher crashes.


    - ASUS ROG STRIX Z370-E - i7-8700k - ASUS ROG STRIX RTX 3090 OC - 32GB Corsair Vengeance DDR4 3000MHz -
    - CORSAIR AX1000 PSU - Noctua NH-U14S CPU Cooler -
    - Virpil T50 Mongoos with Warthog Grip plus Extension Set -
    - TM Warthog Throttle -
    - Slaw Device 109 Cam Rudder Pedals -
    - HighseasPeripherals(tm) - Engine Switch Panel - Munitions Switch Panel - Throttle Quadrant Trim Box - Helicopter Collective - Analogue Brake Lever -

    (Operated by a 1972 Standard Issue Talking Monkey)



    ASUS ROG STRIX Z370-E - i7-8700k
    ASUS ROG STRIX RTX 3090 OC
    32GB Corsair Vengeance DDR4 3000MHz
    Windows 11 x64

    Flat Screen Resolution 2560 x 1440 Gsync Monitor
    SteamVR res: Set to 100% 3164x3092

    Game Saved to G:\ M2 SSD MOVED TO C DRIVE 3 MARCH 2022
    My Documents Saved to D:\ Standard SSD
    Nvidia driver version: Always the latest

  16. #44
    Veteran Combat pilot dix's Avatar
    Join Date
    Mar 2016
    Location
    Italy
    Posts
    297
    Post Thanks / Like
    Total Downloaded
    77.43 MB

    Re: TSNotifier for Beginners [Definitive Guide]

    Quote Originally Posted by DoubleStandards View Post
    I believe you have to start up TS Notifier after you start Cliffs.

    DS
    Quote Originally Posted by Highseas View Post
    I just did this last night using the latest versions of teamspeak and teamspeak notifier.

    All works as it should.

    Run Clod before starting up the notifier.... (as it says in the original post) or the launcher crashes.
    mmm... i've to launch it before clod or I won't see the overlay at all, it actually starts whenever i launch TS
    and I never had crashes due to tsnotifier O_o"


    No.54 Dix (KL-X)


  17. #45
    Veteran Combat pilot Hurricane's Avatar
    Join Date
    Feb 2017
    Location
    South West Wales
    Posts
    359
    Post Thanks / Like
    Total Downloaded
    1.51 GB

    Re: TSNotifier for Beginners [Definitive Guide]

    Worked like a treat thank you, no problems.

    Only discovered this today.


    Best regards,
    Mike.
    The trouble with the world is that the stupid are cocksure and the intelligent are full of doubt.

  18. #46
    Supporting Member Baffin's Avatar
    Join Date
    Apr 2013
    Location
    Northwestern Virginia, USA
    Posts
    1,933
    Post Thanks / Like
    Total Downloaded
    127.26 MB

    Re: TSNotifier for Beginners [Definitive Guide]

    One thing's for sure... The definitive guide is no longer definitive! So much depends on each player's system configuration as to how TS3 and TSNotifier interacts with CLoD, SLI, Target Script Editor, TrackIR5, and many overclocking utilities. The latest TS3 and TSN versions work fine in my system after a little re-sequencing.

    After completely removing old versions with Windows Control Panel or a free app like CCleaner, I personally recommend the normal installation sequence as recommended by the publishers of TS3 and TSN. Then if something doesn't work, start changing the startup sequence of the game play utilities like those mentioned in the first paragraph.

    My CLoD start sequence has changed a number of times and is presently: Target Script Editor, TrackIR5, Saitek Profiler, VAC System, CLoD, TS3 (With TSN activated) and finally MSI Afterburner for overclocking. I determined this recipe by trial and error and keep it all straight by displaying start Icons in a row on the desktop in this order. There does not seem to be a definitive method, - i.e., Dix's sequence will not work for me and my sequence will probably not work for him.

    All you can do is search for a method that works for you. It's worth the effort!
    Last edited by Baffin; Apr-10-2017 at 10:13.
    Windows 10 Pro 64-bit, ASUS TUF X299 MARK 1 (LGA 2066 R4), 2x 1 TB Samsung M.2 SSD 970/960 EVO. Intel Core i7 7800X, overclocked CPU: 4.4 GHz, using TPUII BIOS feature. Air Cooling (GPU:<70°/CPU:<80°) with Hyper 212 Cooler w/ 2 fans. 32.0GB RAM at 2772MHz (16-17-17-36), LG 55" 4K OLEDC7P TV, 2-way SLI using NVIDIA GeForce GTX 1080 Ti's (MSI) overclocked: +80/+250 (MSI Afterburner) using NVIDIA color settings: Highest-8bpc/YCbCr444-Limited. Realtek High Definition Audio, Sony Surround amp w/ optical cable for 5.1 speakers, Ear Buds from Motherboard for Discord/TeamSpeak3. ASUS Blu-Ray drive BW-12B1ST, TrackIR5, Buttkicker Gamer 2, Thrustmaster Warthog, 2x Saitek X-52 (Buttons & Gear), Gear-Falcon Trim Box, Thrustmaster TPR Pendular Rudder Pedals. Voice Activated Controls.

  19. #47
    ATAG Member ATAG_Knight's Avatar
    Join Date
    Oct 2013
    Location
    Horley , Surrey , England , UK
    Posts
    735
    Post Thanks / Like
    Total Downloaded
    119.00 MB

    Re: TSNotifier for Beginners [Definitive Guide]

    Hi All

    I've been looking for an Overlay / Notifier for sometime . Followed the instructions and it works great on my system .

    Well done and thanks.

  20. Likes farley, Baffin liked this post
  21. #48
    Supporting Member Baffin's Avatar
    Join Date
    Apr 2013
    Location
    Northwestern Virginia, USA
    Posts
    1,933
    Post Thanks / Like
    Total Downloaded
    127.26 MB

    Re: TSNotifier for Beginners [Definitive Guide]

    I have noticed another sequencing factor. It's not TeamSpeak Client that causes my startup problem, it's the TSNotifier add-on. I can successfully start CLoD with the TS3 Client running as long as TSNotifier is not running ([TRAY] TSNotifier>General>Start with TS3 is not checked).

    This supports the concept that CLoD startup is not friendly with overlays like TSNotifier and MSI Afterburner's Rivatuner Statistics Server. These "Sub" Programs provide the screen display for TSNotifier and MSI Afterburner output and are responsible for my failure of CLoD to start if they are running. After CLoD startup, they may be started and used normally.

    My sequence is now Target Script Editor, TrackIR5, Saitek Profiler, VAC System, TS3 (With TSN not activated). Next, I start CLoD, and finally MSI Afterburner for overclocking OSD. TSNotifier may then be started from the desktop as an administrator or from the TS3 Client Tools>Options>Addons menu.

    However I start these overlays, I have to start them after starting the CLoD launcher.exe.
    Last edited by Baffin; Apr-27-2017 at 10:25.
    Windows 10 Pro 64-bit, ASUS TUF X299 MARK 1 (LGA 2066 R4), 2x 1 TB Samsung M.2 SSD 970/960 EVO. Intel Core i7 7800X, overclocked CPU: 4.4 GHz, using TPUII BIOS feature. Air Cooling (GPU:<70°/CPU:<80°) with Hyper 212 Cooler w/ 2 fans. 32.0GB RAM at 2772MHz (16-17-17-36), LG 55" 4K OLEDC7P TV, 2-way SLI using NVIDIA GeForce GTX 1080 Ti's (MSI) overclocked: +80/+250 (MSI Afterburner) using NVIDIA color settings: Highest-8bpc/YCbCr444-Limited. Realtek High Definition Audio, Sony Surround amp w/ optical cable for 5.1 speakers, Ear Buds from Motherboard for Discord/TeamSpeak3. ASUS Blu-Ray drive BW-12B1ST, TrackIR5, Buttkicker Gamer 2, Thrustmaster Warthog, 2x Saitek X-52 (Buttons & Gear), Gear-Falcon Trim Box, Thrustmaster TPR Pendular Rudder Pedals. Voice Activated Controls.

  22. #49
    Supporting Member
    Join Date
    Feb 2016
    Posts
    215
    Post Thanks / Like
    Total Downloaded
    938.46 MB

    Re: TSNotifier for Beginners [Definitive Guide]

    Quote Originally Posted by Baffin View Post
    I have noticed another sequencing factor. It's not TeamSpeak Client that causes my startup problem, it's the TSNotifier add-on. I can successfully start CLoD with the TS3 Client running as long as TSNotifier is not running ([TRAY] TSNotifier>General>Start with TS3 is not checked).

    This supports the concept that CLoD startup is not friendly with overlays like TSNotifier and MSI Afterburner's Rivatuner Statistics Server. These "Sub" Programs provide the screen display for TSNotifier and MSI Afterburner output and are responsible for my failure of CLoD to start if they are running. After CLoD startup, they may be started and used normally.

    My sequence is now Target Script Editor, TrackIR5, Saitek Profiler, VAC System, TS3 (With TSN not activated). Next, I start CLoD, and finally MSI Afterburner for overclocking OSD. TSNotifier may then be started from the desktop as an administrator or from the TS3 Client Tools>Options>Addons menu.

    However I start these overlays, I have to start them after starting the CLoD launcher.exe.
    My experience would support this: I've found as soon as I run TS Notifier as administrator Cliffs will not run. If I don't run it as admin, Cliffs runs but TS Notifier doesn't work. I have tested TS Notifier on other games and it works fine, so nothing to do with my install. Most frustrating.

  23. #50
    Supporting Member gridset's Avatar
    Join Date
    Apr 2017
    Location
    Norway
    Posts
    11
    Post Thanks / Like
    Total Downloaded
    212.31 MB

    Re: TSNotifier for Beginners [Definitive Guide]

    This now works perfectly as of TS 3.1.4.2

  24. #51
    Supporting Member
    Join Date
    Feb 2016
    Posts
    215
    Post Thanks / Like
    Total Downloaded
    938.46 MB

    Re: TSNotifier for Beginners [Definitive Guide]

    Quote Originally Posted by gridset View Post
    This now works perfectly as of TS 3.1.4.2
    Cheers, will test it out. Much easier having it function correctly without the hassle of the existing workaround.

  25. #52
    Student Pilot
    Join Date
    Sep 2017
    Location
    Oregon USA
    Posts
    6
    Post Thanks / Like
    Total Downloaded
    84.6 KB

    Re: TSNotifier for Beginners [Definitive Guide]

    TS Notifier works good win10 amd Athlon 64 4gb. However, when started it doesn't show in the tray at the bottom but rather as a hidden icon. Took me a while to realize. Also the INI file doesn't have to be modified to locate where the text appears, it is under GENERAL when you click on the hidden TSNotifier icon, (right left can't remember.) It likes to reset to the upper left whenever I restart it.

  26. #53
    Supporting Member Baffin's Avatar
    Join Date
    Apr 2013
    Location
    Northwestern Virginia, USA
    Posts
    1,933
    Post Thanks / Like
    Total Downloaded
    127.26 MB

    Re: TSNotifier for Beginners [Definitive Guide]

    For reality seekers: This behavior is perfectly normal in real-life aviation. You get in the plane, then turn on the radio. Some old types may require engine running before the radio is available but in all cases, the radio is OFF before entering the cockpit for preflight. Starting TeamSpeak and TSNotifier after seeing the virtual cockpit on the screen is the "right and proper thing to do!"
    Last edited by Baffin; Sep-30-2017 at 11:17.
    Windows 10 Pro 64-bit, ASUS TUF X299 MARK 1 (LGA 2066 R4), 2x 1 TB Samsung M.2 SSD 970/960 EVO. Intel Core i7 7800X, overclocked CPU: 4.4 GHz, using TPUII BIOS feature. Air Cooling (GPU:<70°/CPU:<80°) with Hyper 212 Cooler w/ 2 fans. 32.0GB RAM at 2772MHz (16-17-17-36), LG 55" 4K OLEDC7P TV, 2-way SLI using NVIDIA GeForce GTX 1080 Ti's (MSI) overclocked: +80/+250 (MSI Afterburner) using NVIDIA color settings: Highest-8bpc/YCbCr444-Limited. Realtek High Definition Audio, Sony Surround amp w/ optical cable for 5.1 speakers, Ear Buds from Motherboard for Discord/TeamSpeak3. ASUS Blu-Ray drive BW-12B1ST, TrackIR5, Buttkicker Gamer 2, Thrustmaster Warthog, 2x Saitek X-52 (Buttons & Gear), Gear-Falcon Trim Box, Thrustmaster TPR Pendular Rudder Pedals. Voice Activated Controls.

  27. #54
    Supporting Member
    Join Date
    Oct 2013
    Posts
    108
    Post Thanks / Like
    Total Downloaded
    0

    Re: TSNotifier for Beginners [Definitive Guide]

    I'm feeling a tad frustrated.... After having Teamspeak and TSNotifier working perfectly for AGES I stupidly clicked OK for the automatic update of TS. Biggest. Mistake. Ever. Firstly I had push to talk mapped to joystick button and that no longer worked and to cap that I lost the Notifier display in game.

    I did get TS work properly eventually (I've installed a much earlier version) but I still can't get any Notifier display when playing CLOD. I've tried all the hints tips and tricks....

    I get the TSNotifier message in CLOD to say it's running / activated but no display. Also, Notifier does not show up in the list of TS plugins.

    Can anyone help?

  28. #55
    Public Relations ATAG_Lewis's Avatar
    Join Date
    Jan 2012
    Location
    Sheffield UK
    Posts
    7,254
    Post Thanks / Like
    Total Downloaded
    506.15 MB

    Re: TSNotifier for Beginners [Definitive Guide]

    I managed to get mine running using this (below) in the 'gamesettings.ini'

    [Launcher64.exe]

    and NOT...

    [Launcher.exe]

    I think this is what works since BLITZ edition..not sure...It worked for me when I followed Turns run through on the OP...If this is the case I will either get Turn to edit the OP or I can do it...But I need to know if this is correct first so any feedback welcome..

    ...Lew...
    "The trouble with the world is that the stupid are cocksure and the intelligent are full of doubt.'' - Bertrand Russell
    1.618 - You know this number?
    My Turing machine :CPU: Intel Core i7 2700K 3.50GHz Sandybridge, Motherboard: Asus Maximus IV Extreme -Z Intel Z68 (Socket 1155) PCI-Express DDR3,
    RAM: 8GB (2x4GB) DDR3 Dual Channel Kit, Graphics Card: Nvidia GeForce GTX 970 4096MB GDDR5, OS:Windows 10
    Joystick: Microsoft Sidewinder II ForceFeedback Joystick, Throttle: CH Products Pro Throttle
    ATAG_Lewis Youtube Channel

  29. Likes ATAG_Snapper liked this post
  30. #56
    Student Pilot GrumpyMoose's Avatar
    Join Date
    Sep 2021
    Location
    Vancouver, Canada
    Posts
    7
    Post Thanks / Like
    Total Downloaded
    5.36 MB

    Re: TSNotifier for Beginners [Definitive Guide]

    **RESOLVED** Anyone still using the TSNotifier in 2022? I spent hours trying to get it to work, unsuccessfully.

    Can anyone suggest an overlay that is know to work?
    Last edited by GrumpyMoose; Jun-14-2022 at 17:49.
    AMD Ryzen 5 3600 3.6 GHz 6-Core Processor / Cooler Master Hyper 212 Black Edition 42 CFM CPU Cooler / Asus TUF GAMING B550M-PLUS (WI-FI) Micro ATX AM4 Motherboard / Corsair Vengeance LPX 16 GB (2 x 8 GB) DDR4-3200 CL16 Memory / Samsung 980 Pro 250 GB M.2-2280 NVME Solid State Drive / Samsung 980 1 TB M.2-2280 NVME Solid State Drive / MSI GeForce GTX 1050 Ti 4 GB Video Card / Cooler Master MasterBox NR400 MicroATX Mid Tower Case / EVGA GQ 650 W 80+ Gold Certified Semi-modular ATX Power Supply / Phanteks PH-F120SK 50 CFM 120 mm Fan / Phanteks FSK 84.5 CFM 140 mm Fans 3-Pack / Phanteks PH-CB-CMBO_WT 19.68" Cables - Internal Power Cables" / Havit Mechanical Keyboard and Mouse Combo RGB Gaming / TrackIR 5 / CH Fighterstick / CH Pro Throttle / CH Throttle Quadrant / CH Pro Pedals / Razer BlackShark V2 Pro headset / Samsung 40" TV

  31. Likes ATAG_Snapper liked this post
  32. #57
    Student Pilot GrumpyMoose's Avatar
    Join Date
    Sep 2021
    Location
    Vancouver, Canada
    Posts
    7
    Post Thanks / Like
    Total Downloaded
    5.36 MB

    Re: TSNotifier for Beginners [Definitive Guide]

    Quote Originally Posted by GrumpyMoose View Post
    Anyone still using the TSNotifier in 2022? I spent hours trying to get it to work, unsuccessfully.

    Can anyone suggest an overlay that is know to work?
    I got it working after all. Just after I made this post. Go figure.

    Any way it was Lewis' last post that saved me. Thanks mate!
    AMD Ryzen 5 3600 3.6 GHz 6-Core Processor / Cooler Master Hyper 212 Black Edition 42 CFM CPU Cooler / Asus TUF GAMING B550M-PLUS (WI-FI) Micro ATX AM4 Motherboard / Corsair Vengeance LPX 16 GB (2 x 8 GB) DDR4-3200 CL16 Memory / Samsung 980 Pro 250 GB M.2-2280 NVME Solid State Drive / Samsung 980 1 TB M.2-2280 NVME Solid State Drive / MSI GeForce GTX 1050 Ti 4 GB Video Card / Cooler Master MasterBox NR400 MicroATX Mid Tower Case / EVGA GQ 650 W 80+ Gold Certified Semi-modular ATX Power Supply / Phanteks PH-F120SK 50 CFM 120 mm Fan / Phanteks FSK 84.5 CFM 140 mm Fans 3-Pack / Phanteks PH-CB-CMBO_WT 19.68" Cables - Internal Power Cables" / Havit Mechanical Keyboard and Mouse Combo RGB Gaming / TrackIR 5 / CH Fighterstick / CH Pro Throttle / CH Throttle Quadrant / CH Pro Pedals / Razer BlackShark V2 Pro headset / Samsung 40" TV

  33. Likes ATAG_Snapper liked this post
Page 2 of 2 FirstFirst 12

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •