Extending the camouflage turned out to be a longer task than expected. But after some touch ups it turned out very well in my opinion.
V2:Change Yellow to White.(Completed on 2017-11-10)
Changing the overall color was very simple when it came down to it due to the fact that I had a proper template with the 3D Elements as a different layer, I was able to use the bucket tool to fill in all the yellow without interfering with the 3D elements.
V3:Make propeller tip & center yellow.(Completed on 2017-11-10)
The difficult part of this task was to find the location of the blade tips, I decided to make a color skin to determine the approximate location of the blade tips. (Screenshot below)
V4:Add custom markings. (Completed on 2017-11-10)
This was strait forward, simply adding an image on an image.
----------------------------------------------------------------------------------------------------------------------------------------------------------------------- Notes:
During the making of the skin I encountered some issues with residue yellow from the template I used in the beginning that seems to have originated from the 3D elements. I presume that the residue was present because in its original form it was "Wear & Tear" of the aircraft with proper coloring. I was unable to change the yellow residue to a white or metallic color, I left the residue there because it seems to be unnoticeable during flight.
Last edited by No.331_Fredrik; Nov-10-2017 at 16:49.
Bookmarks