Results 1 to 8 of 8

Thread: Ctrl F2 jumps to each camera position only in Blitz

  1. #1
    Supporting Member
    Join Date
    Sep 2014
    Posts
    608
    Post Thanks / Like
    Total Downloaded
    1.63 GB

    Ctrl F2 jumps to each camera position only in Blitz

    Hi,
    set up mission with 4 cameras in Blitz, one at each location , Hawkinge, then nr Lympne, then at coast then at Dungeness lighthouse.
    Ctrl F2 takes me in Blitz to first camera then cycles through the cameras, starting hawkinge and ending at Dungeness. then cycles through aircraft then back to first camera at Hawkinge.

    then flown the mission on 4.312 to do stills and video of a complete accurate looking 110 flight with tail markings , the Mod I shall be using until historic mkgs is fixed for Blitz, and Ctrl F2 only showed me differing shots at Hawkinge, as if 4 cameras were scattered about Hawkinge. It didnt even cycle through the aircraft.

    As Ctrl F2 is jump to next object does that mean jump to next object is inoperative outside of Blitz ?
    Are mis files not backward compatible ?

    Will I have to set up my missions all over again in 4.312 ?

    BOBC
    Last edited by BOBC; Aug-29-2018 at 16:42.

  2. #2
    Supporting Member
    Join Date
    Sep 2014
    Posts
    608
    Post Thanks / Like
    Total Downloaded
    1.63 GB

    Re: Ctrl F2 jumps to each camera position only in Blitz

    Please anyone a reply to this problem ?
    Quote Originally Posted by BOBC View Post
    Hi,
    set up mission with 4 cameras in Blitz, one at each location , Hawkinge, then nr Lympne, then at coast then at Dungeness lighthouse.
    Ctrl F2 takes me in Blitz to first camera then cycles through the cameras, starting hawkinge and ending at Dungeness. then cycles through aircraft then back to first camera at Hawkinge.

    then flown the mission on 4.312 to do stills and video of a complete accurate looking 110 flight with tail markings , the Mod I shall be using until historic mkgs is fixed for Blitz, and Ctrl F2 only showed me differing shots at Hawkinge, as if 4 cameras were scattered about Hawkinge. It didnt even cycle through the aircraft.

    As Ctrl F2 is jump to next object does that mean jump to next object is inoperative outside of Blitz ?
    Are mis files not backward compatible ?

    Will I have to set up my missions all over again in 4.312 ?

    BOBC

  3. #3
    Team Fusion ♣_Spiritus_♣'s Avatar
    Join Date
    Dec 2013
    Location
    The Demon-Haunted World: Science as a Candle in the Dark
    Posts
    5,600
    Post Thanks / Like
    Blog Entries
    2
    Total Downloaded
    0

    Re: Ctrl F2 jumps to each camera position only in Blitz

    No ideas but why are you going back to 4.312?

  4. #4
    ATAG Member ATAG_kiwiflieger's Avatar
    Join Date
    Jan 2017
    Location
    Top of the South, New Zealand
    Posts
    664
    Post Thanks / Like
    Total Downloaded
    121.95 MB

    Re: Ctrl F2 jumps to each camera position only in Blitz

    You could try checking your keybindings if they are different between 4.312 and 4.5, otherwise the best option might be manually adding the Hakenkreuz to the 110 skins and using 4.5 for the recording.


    "Speed is life. Altitude is life insurance. Surprise is key."


    ~ AMD FX-4100 3.6GHz (OC to 4GHz) ~ 8GB RAM ~ ASUS GTX1050Ti Phoenix 4GB ~
    T.16000M ~ TWCS Throttle ~ TFRP Pedals ~ DIY IR Headtracker


  5. #5
    Ace Mysticpuma's Avatar
    Join Date
    Dec 2012
    Location
    Worcestershire, UK
    Posts
    5,132
    Post Thanks / Like
    Blog Entries
    1
    Total Downloaded
    2.38 GB

    Re: Ctrl F2 jumps to each camera position only in Blitz

    Quote Originally Posted by 69th_Spiritus_Mortem View Post
    No ideas but why are you going back to 4.312?
    Because he wants to use the historic markings enabler which TFS can't release for v4.5x
    "The needs of the Flight Sim Community outweigh the needs of the one or the few"

  6. #6
    Ace Mysticpuma's Avatar
    Join Date
    Dec 2012
    Location
    Worcestershire, UK
    Posts
    5,132
    Post Thanks / Like
    Blog Entries
    1
    Total Downloaded
    2.38 GB

    Re: Ctrl F2 jumps to each camera position only in Blitz

    The Ctrl+F2 will jump to the cameras.... but you will have to cycle through the objects until you eventually get to the cameras..... as these are objects too.
    "The needs of the Flight Sim Community outweigh the needs of the one or the few"

  7. #7
    Team Fusion LARRY69's Avatar
    Join Date
    Feb 2013
    Location
    Switzerland
    Posts
    1,102
    Post Thanks / Like
    Total Downloaded
    873.48 MB

    Re: Ctrl F2 jumps to each camera position only in Blitz

    Hi BOBC,

    I want just show you, how I use to handel the camera-stuff. If I press Ctrl+F2 that takes me to the first camera, with another press it goes to the second and so on. Then it starts to show the first static opject. To not go trough all the static stuff, I press Shift+F2, that show the first friendly aircraft. Then I press again Ctrl+F2 and it jumps to the first camera again.

    I don`t know it helps you with your problem, but for myself it`s goes well, easy, and fast.
    Last edited by LARRY69; Dec-30-2018 at 04:46.
    http://i1364.photobucket.com/albums/r739/larry691/GZ-H%201_zpsdphexiii.jpg

  8. Likes ATAG_Snapper liked this post
  9. #8
    Supporting Member
    Join Date
    Sep 2014
    Posts
    608
    Post Thanks / Like
    Total Downloaded
    1.63 GB

    Re: Ctrl F2 jumps to each camera position only in Blitz

    Hi,
    where in options controls is the key binding for ground cameras ? need to know despite somehow fixing the problem though how I dont know.

    I couldnt get 4.312 to toggle through ground cameras like Blitz, but tonight I can !..gremlins ! or Larrys Shift F2 tip unstuck it.


    MANY THANKS Larry for the shortcut back to cameras tip, thats going to be invaluable, awesome tip !

    BOBC
    Last edited by BOBC; Jan-05-2019 at 16:35.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •