Page 1 of 2 12 LastLast
Results 1 to 30 of 39

Thread: RAF Reticle Issue

  1. #1
    ATAG Member ATAG_Highseas's Avatar
    Join Date
    Feb 2016
    Location
    Peurto del Slade, UK
    Posts
    5,112
    Post Thanks / Like
    Total Downloaded
    526.76 MB

    RAF Reticle Issue

    Hello chaps.

    Last night as i was flying my reticle changed betweeen one spqawn and the next.... and looked like it has been drawn with a crayon !!

    all other graphics were 100% excellent... just the reticle.

    it was happening in the spit 1a 100 and the Huirricane Rotol.

    Deleted the chache... restarted the machine... but it stayed exactly the same...

    my grpahics settings are all set to high... just as always... so no change there.


    Anyone else had this?

    I did manage to take a 109 down... but I'd rather have had a propper gunsight to use !


    - ASUS ROG STRIX Z370-E - i7-8700k - ASUS GTX 1080 Ti ROG STRIX OC - 16GB Corsair Vengeance DDR4 3000MHz -
    - CORSAIR 850W RMx Series PSU - Noctua NH-U14S CPU Cooler -
    - Virpil T50 Mongoos with Warthog Grip plus Extension Set -
    - TM Warthog Throttle -
    - Slaw Device 109 Cam Rudder Pedals -
    - HighseasPeripherals(tm) - Engine Switch Panel - Munitions Switch Panel - Throttle Quadrant Trim Box -

    (Operated by a 1972 Standard Issue Talking Monkey)

  2. #2
    Team Fusion Kling's Avatar
    Join Date
    Nov 2011
    Location
    Stockholm, Sweden
    Posts
    3,951
    Post Thanks / Like
    Total Downloaded
    0

    Re: RAF Reticle Issue

    Quote Originally Posted by ATAG_Highseas View Post
    Hello chaps.

    Last night as i was flying my reticle changed betweeen one spqawn and the next.... and looked like it has been drawn with a crayon !!

    all other graphics were 100% excellent... just the reticle.

    it was happening in the spit 1a 100 and the Huirricane Rotol.

    Deleted the chache... restarted the machine... but it stayed exactly the same...

    my grpahics settings are all set to high... just as always... so no change there.


    Anyone else had this?

    I did manage to take a 109 down... but I'd rather have had a propper gunsight to use !
    What are your nvidia settings?

  3. #3
    ATAG Member ATAG_Highseas's Avatar
    Join Date
    Feb 2016
    Location
    Peurto del Slade, UK
    Posts
    5,112
    Post Thanks / Like
    Total Downloaded
    526.76 MB

    Re: RAF Reticle Issue

    Default other than fastsync being enabled.


    - ASUS ROG STRIX Z370-E - i7-8700k - ASUS GTX 1080 Ti ROG STRIX OC - 16GB Corsair Vengeance DDR4 3000MHz -
    - CORSAIR 850W RMx Series PSU - Noctua NH-U14S CPU Cooler -
    - Virpil T50 Mongoos with Warthog Grip plus Extension Set -
    - TM Warthog Throttle -
    - Slaw Device 109 Cam Rudder Pedals -
    - HighseasPeripherals(tm) - Engine Switch Panel - Munitions Switch Panel - Throttle Quadrant Trim Box -

    (Operated by a 1972 Standard Issue Talking Monkey)

  4. #4
    ATAG Member ATAG_Jeepy's Avatar
    Join Date
    Sep 2011
    Posts
    359
    Post Thanks / Like
    Blog Entries
    1
    Total Downloaded
    0

    Re: RAF Reticle Issue

    Hi Seas.

    Try this. Go in Your Nvidia ctrl panel, select MFAA and FXAA on.
    Run a "test" mission (quick miss).
    Reticle should B ok.. :-?
    If You want, switch them back again.
    Reticle should still be ok.. I know..funny

    Good luck sir!
    Intel Core i7 3770k 3,5 ghz Ivy Bridge, 32 gb ram, Nvidia GeForce GTX 780 3 gb,
    SSD (Kingston HyperX 120+250 gb), Windows X, PS 1050w.

  5. Likes Baffin liked this post
  6. #5
    Supporting Member
    Join Date
    Apr 2013
    Location
    Northwestern Virginia, USA
    Posts
    1,601
    Post Thanks / Like
    Total Downloaded
    127.26 MB

    Re: RAF Reticle Issue

    Quote Originally Posted by ATAG_Jeepy View Post
    Hi Seas.

    Try this. Go in Your Nvidia ctrl panel, select MFAA and FXAA on.
    Run a "test" mission (quick miss).
    Reticle should B ok.. :-?
    If You want, switch them back again.
    Reticle should still be ok.. I know..funny

    Good luck sir!
    I found the same solution, without MFAA adjustments... I found that the vague, "Crayon" reticle disappeared after I enabled NVIDIA FXAA alone. Since I use the NVIDIA Profile Inspector instead of the NCP, I went to "section 3 - Antialiasing", and at the bottom of that list of options, selected "Toggle FXAA on or off", with the "ON" option. On my 4k display, this has no impact other than to clear up the gunsight reticle problem.

    Changing the in-game Video Options > Antialiasing to anything other than "OFF" also fixed it but I prefer to leave true AA disabled to enhance distant target spotting. FXAA is described as a "Post Processing" feature which has no impact on frame rate and target acquisition on my 4k display.
    Like always, experiment with this stuff on your own system to find the best solution for you.

    EDIT: Recommend post # 7, below. Driver update fixed my problem so far...

    EDIT: More to read in post #8 below. Problem remains.
    Last edited by Baffin; Oct-03-2018 at 10:10.

  7. #6
    Supporting Member TNScones's Avatar
    Join Date
    Sep 2016
    Location
    United Kingdom
    Posts
    242
    Post Thanks / Like
    Total Downloaded
    0

    Re: RAF Reticle Issue

    Hello, 'Seas.

    Have you found a solution yet? And have you got VSync enabled along with GSync?

    I had that reticle months ago but can't remember what, if anything, I did to remedy it.

    But I think it may have been VSync in the Video Options. I don't have it enabled now and the reticle is fine.

    I just now enabled it to see what effect it would have on the reticle. With GSync and VSync now enabled, I jumped on multiplayer and there it was, that fuzzy reticle!

    Came out of multiplayer, disabled VSync, went back on and the reticle was normal again.

    Last edited by TNScones; Sep-28-2018 at 18:19.

  8. #7
    ATAG Member ATAG_Highseas's Avatar
    Join Date
    Feb 2016
    Location
    Peurto del Slade, UK
    Posts
    5,112
    Post Thanks / Like
    Total Downloaded
    526.76 MB

    Re: RAF Reticle Issue

    There was an Nvidia driver update yesterday.

    Seems to have cured it.

    Huzza!


    - ASUS ROG STRIX Z370-E - i7-8700k - ASUS GTX 1080 Ti ROG STRIX OC - 16GB Corsair Vengeance DDR4 3000MHz -
    - CORSAIR 850W RMx Series PSU - Noctua NH-U14S CPU Cooler -
    - Virpil T50 Mongoos with Warthog Grip plus Extension Set -
    - TM Warthog Throttle -
    - Slaw Device 109 Cam Rudder Pedals -
    - HighseasPeripherals(tm) - Engine Switch Panel - Munitions Switch Panel - Throttle Quadrant Trim Box -

    (Operated by a 1972 Standard Issue Talking Monkey)

  9. Likes Baffin liked this post
  10. #8
    Supporting Member
    Join Date
    Apr 2013
    Location
    Northwestern Virginia, USA
    Posts
    1,601
    Post Thanks / Like
    Total Downloaded
    127.26 MB

    Re: RAF Reticle Issue

    I was hoping that the new (411.70) driver package was the answer. Woe and gloom... it was not. I have noticed that not only is the gun sight reticle distorted, but also the panels, rivets and other "details" on the top of the wings are gone, leaving a featureless, washed out look. Only the exterior skin of the aircraft is affected, not the cockpit details.

    Sometimes playing with the Anti-Aliasing settings, including FXAA, will fix the problem but sometimes not. It seems to come from the ATAG server when it happens because none of the other servers has had this problem on my system. I plan to start a diary whenever I run into this in the future. Perhaps there is a common thread.

    Overclocking is not the cause. It can happen even with the NVIDIA card fully reset.

    Still investigating...
    Last edited by Baffin; Oct-03-2018 at 10:11.

  11. #9
    Ace No.401_Wolverine's Avatar
    Join Date
    Jan 2012
    Posts
    726
    Post Thanks / Like
    Total Downloaded
    966.2 KB

    Re: RAF Reticle Issue

    I was experiencing this issue as well. Never did find a solution after a lot of tweaking and messing about with settings. I have a GTX 1080ti so, pretty sure my card is up to the task of the game. There's got to be something going on with the way textures are being rendered (issue was reticle sometimes, but also sometimes the aircraft textures in game and in the aircraft selection/customization windows). Will continue to watch this thread for possible fixes.

  12. Likes Baffin liked this post
  13. #10
    Supporting Member
    Join Date
    Apr 2013
    Location
    Northwestern Virginia, USA
    Posts
    1,601
    Post Thanks / Like
    Total Downloaded
    127.26 MB

    Re: RAF Reticle Issue

    Depending on how many times I change settings like VSych, A/A, etc, I can invoke three levels of exterior skin detail:

    1. No detail at all. Only camouflage colors on a smooth wing surface.
    2. Panel Lines and markings with no 3D effect. Hazy indistinct lines and letters, again on a smooth wing surface.
    3. Normal full 3D markings on a realistically textured wing surface.

    Gunsight reticle is usually vague and indistinct with 1. and 2. above. It's crystal clear when the wing texture is correct. (3)

    When 1. or 2. above apply, there is a "Rectangle" protruding from the aft right side of the fuselage. It looks sort of like an open access panel. I have to look out and back using trackIR to see it. ...hurts my neck!

    I plan to revert to earlier NVIDIA drivers after testing my present settings some more. (Resolution, etc)
    Last edited by Baffin; Oct-05-2018 at 16:24.
    Windows 10 Pro 64-bit, ASUS TUF X299 MARK 1 (LGA 2066 R4), Intel Core i7 7800X, 32.0GB RAM@1386MHz (16-17-17-36), LG 55" 4K OLEDC7P TV, NVIDIA GeForce GTX 1080 Ti (MSI), 931GB Samsung SSD 960 EVO 1TB, 931GB Western Digital HD WD1002FAEX, Realtek High Definition Audio, Sony Surround amp for 5.1 speakers, Ear Buds for TeamSpeak3, ASUS Blu-Ray BW-12B1ST, TrackIR5, Buttkicker Gamer, Thrustmaster Warthog, Saitek X-52 (Trim & Gear), Saitek Pro Flight Combat Rudder Pedals, Voice Activated Controls. Overclock CPU: 4575, using BIOS features. Overclock GPU: +65/+300 (MSI Afterburner). Air Cooling (GPU:60°/CPU:58°). Using NVIDIA color settings: Highest-8bpc/YCbCr444-Limited. PhysX Processor: CPU.

  14. Likes ATAG_Highseas, TNScones liked this post
  15. #11
    ATAG Member ATAG_Highseas's Avatar
    Join Date
    Feb 2016
    Location
    Peurto del Slade, UK
    Posts
    5,112
    Post Thanks / Like
    Total Downloaded
    526.76 MB

    Re: RAF Reticle Issue

    Quote Originally Posted by Baffin View Post
    Depending on how many times I change settings like VSych, A/A, etc, I can invoke three levels of exterior skin detail:

    1. No detail at all. Only camouflage colors on a smooth wing surface.
    2. Lines and markings with no 3D effect. Hazy indistinct lines and letters, again on a smooth wing surface.
    3. Normal full 3D markings on a realistically textured wing surface.

    Gunsight reticle is usually vague and indistinct with 1. and 2. above. It's crystal clear when the wing texture is correct. (3)

    I plan to revert to earlier NVIDIA drivers after testing my present settings some more. (Resolution, etc)
    Exactly this.....

    If the reticle is in "crayon mode"... the skin on my wings is... just background paint in very low definition.

    Your post triggered my memory...

    These are interlinked.



    - ASUS ROG STRIX Z370-E - i7-8700k - ASUS GTX 1080 Ti ROG STRIX OC - 16GB Corsair Vengeance DDR4 3000MHz -
    - CORSAIR 850W RMx Series PSU - Noctua NH-U14S CPU Cooler -
    - Virpil T50 Mongoos with Warthog Grip plus Extension Set -
    - TM Warthog Throttle -
    - Slaw Device 109 Cam Rudder Pedals -
    - HighseasPeripherals(tm) - Engine Switch Panel - Munitions Switch Panel - Throttle Quadrant Trim Box -

    (Operated by a 1972 Standard Issue Talking Monkey)

  16. #12
    Supporting Member TNScones's Avatar
    Join Date
    Sep 2016
    Location
    United Kingdom
    Posts
    242
    Post Thanks / Like
    Total Downloaded
    0

    Re: RAF Reticle Issue

    I have never touched my NVidia settings and I have had this reticle in the past. I have not had any problems with the reticle for quite some time; but after reading 'Seas' original post about a week ago, I switched Vsync on and off to see what effect it would have on the reticle.

    Result:

    Vsync on: 'crayon mode', Vsync off: normal mode.

    However, I have just repeated this and Vsync had no effect!
    Last edited by TNScones; Oct-04-2018 at 17:00.

  17. Likes Baffin liked this post
  18. #13
    Supporting Member
    Join Date
    Apr 2013
    Location
    Northwestern Virginia, USA
    Posts
    1,601
    Post Thanks / Like
    Total Downloaded
    127.26 MB

    Re: RAF Reticle Issue

    Earlier NVIDIA driver was no help. Newest 411.70 works best on my system.

    I'm going to link this thread to the bugtracker. I think we need the experts to look at this...

    Done: 21:49, 4 Oct 2018
    Last edited by Baffin; Oct-05-2018 at 09:17. Reason: Signature now has NVIDIA settings...
    Windows 10 Pro 64-bit, ASUS TUF X299 MARK 1 (LGA 2066 R4), Intel Core i7 7800X, 32.0GB RAM@1386MHz (16-17-17-36), LG 55" 4K OLEDC7P TV, NVIDIA GeForce GTX 1080 Ti (MSI), 931GB Samsung SSD 960 EVO 1TB, 931GB Western Digital HD WD1002FAEX, Realtek High Definition Audio, Sony Surround amp for 5.1 speakers, Ear Buds for TeamSpeak3, ASUS Blu-Ray BW-12B1ST, TrackIR5, Buttkicker Gamer, Thrustmaster Warthog, Saitek X-52 (Trim & Gear), Saitek Pro Flight Combat Rudder Pedals, Voice Activated Controls. Overclock CPU: 4575, using BIOS features. Overclock GPU: +65/+300 (MSI Afterburner). Air Cooling (GPU:60°/CPU:58°). Using NVIDIA color settings: Highest-8bpc/YCbCr444-Limited. PhysX Processor: CPU.

  19. Likes ATAG_Highseas liked this post
  20. #14
    ATAG Member
    Join Date
    May 2015
    Location
    Brisbane Australia
    Posts
    56
    Post Thanks / Like
    Blog Entries
    1
    Total Downloaded
    45.32 MB

    Re: RAF Reticle Issue

    Hi guys
    I have been having the same above problems for the past two months
    I find this is only on half the maps -and this only happens on the ATAG server
    How i have got around this - i play single player for a few minutes then go back to multi player - it seems to fix the problem 80% of the time
    I have also found this happens sometimes on single player
    I have a 1080Ti video card
    Cheers Soldat

  21. Likes Baffin, TNScones liked this post
  22. #15
    ATAG Member ATAG_Torian's Avatar
    Join Date
    Sep 2011
    Location
    Newcastle, Australia
    Posts
    1,331
    Post Thanks / Like
    Total Downloaded
    104.72 MB

    Re: RAF Reticle Issue

    So are u all running 4K oled TVs as a monitor ?
    Just wondering if it only affects these higher specced TV monitors ?
    Running any other nVidia settings like DSR ?
    Also in the NCP under "Adjust desktop color settings", do u have your TV/Monitor set to "Use NVIDIA settings" ? (that's what I have mine set to anyway)
    Can't say I've seen it on my lowly 27" 1080p monitor.
    System specs:
    Gaming laptop: Metabox P750ZM, CPU Intel i7-4790K @ 4GHz, GTX 980m with 8Gb DDR5 VRAM, 16Gb Dual channel DDR3 RAM, 2 x Samsung EVO 840 500Gb SSDs, Win10 Home 64bit.

    Gaming PC: Asus Rampage III Gene mobo, i7 960 3.2Ghz cpu (running at 3.8Ghz), Noctua dual HS & fan cpu cooler, 24GB Kingston 1600mhz triple channel ram, Samsung EVO 500GB SSD, Corsair 750w psu, EVGA GTX 1070 6GB vram vid card, Windows 10 Pro 64bit.

  23. Likes Baffin liked this post
  24. #16
    Supporting Member
    Join Date
    Apr 2013
    Location
    Northwestern Virginia, USA
    Posts
    1,601
    Post Thanks / Like
    Total Downloaded
    127.26 MB

    Re: RAF Reticle Issue

    New NVIDIA Driver released. (416.16)
    Installed... will report back.


    This driver seems to be no better.
    Last edited by Baffin; Oct-05-2018 at 10:54. Reason: Driver report
    Windows 10 Pro 64-bit, ASUS TUF X299 MARK 1 (LGA 2066 R4), Intel Core i7 7800X, 32.0GB RAM@1386MHz (16-17-17-36), LG 55" 4K OLEDC7P TV, NVIDIA GeForce GTX 1080 Ti (MSI), 931GB Samsung SSD 960 EVO 1TB, 931GB Western Digital HD WD1002FAEX, Realtek High Definition Audio, Sony Surround amp for 5.1 speakers, Ear Buds for TeamSpeak3, ASUS Blu-Ray BW-12B1ST, TrackIR5, Buttkicker Gamer, Thrustmaster Warthog, Saitek X-52 (Trim & Gear), Saitek Pro Flight Combat Rudder Pedals, Voice Activated Controls. Overclock CPU: 4575, using BIOS features. Overclock GPU: +65/+300 (MSI Afterburner). Air Cooling (GPU:60°/CPU:58°). Using NVIDIA color settings: Highest-8bpc/YCbCr444-Limited. PhysX Processor: CPU.

  25. Likes TNScones liked this post
  26. #17
    Ace No.401_Wolverine's Avatar
    Join Date
    Jan 2012
    Posts
    726
    Post Thanks / Like
    Total Downloaded
    966.2 KB

    Re: RAF Reticle Issue

    Quote Originally Posted by ATAG_Torian View Post
    So are u all running 4K oled TVs as a monitor ?
    Just wondering if it only affects these higher specced TV monitors ?
    Running any other nVidia settings like DSR ?
    Also in the NCP under "Adjust desktop color settings", do u have your TV/Monitor set to "Use NVIDIA settings" ? (that's what I have mine set to anyway)
    Can't say I've seen it on my lowly 27" 1080p monitor.
    I am using a Samsung UHD display (not in front of me right now, so can't give you the exact model). Over 50" though. I've tried at various resolution settings. I will examine the other things you've mentioned tonight.

  27. #18
    Supporting Member TNScones's Avatar
    Join Date
    Sep 2016
    Location
    United Kingdom
    Posts
    242
    Post Thanks / Like
    Total Downloaded
    0

    Re: RAF Reticle Issue

    Quote Originally Posted by ATAG_Torian View Post
    So are u all running 4K oled TVs as a monitor ?
    Just wondering if it only affects these higher specced TV monitors ?
    Running any other nVidia settings like DSR ?
    Also in the NCP under "Adjust desktop color settings", do u have your TV/Monitor set to "Use NVIDIA settings" ? (that's what I have mine set to anyway)
    Can't say I've seen it on my lowly 27" 1080p monitor.
    Hello, Torian.

    Not using one here, mine is a 27" Asus 1440, overclockable to 165Hz refresh rate but I never do that. I've opted for 144Hz in Video/Options of Blitz. I've not had the 'crayon' reticle for a long time now but was able to produce it recently but only once when I switched Vsync on in Video/Options.

  28. #19
    Supporting Member
    Join Date
    Apr 2013
    Location
    Northwestern Virginia, USA
    Posts
    1,601
    Post Thanks / Like
    Total Downloaded
    127.26 MB

    Re: RAF Reticle Issue

    I just flew a bunch of tests that seem to suggest that this is related more to the departure airport, airplane or combination thereof, rather than the mission or my hardware/software. (Settings are now in my signature block, below)

    Example: Today, while flying "Operation Dynamo", the problem existed at Eastchurch with a Spitfire Mk 1A (100) every time. I switched to Oye-Plaige in a Spitfire Mk1 (100) and died four times from flak before finally destroying the convoy at Watten. The computer performed flawlessly but it was not just a different base, but also a different plane. Just to see, I spawned at Eastchurch a minute ago in a Spitfire Mk1 (100), and it looked perfect!

    Let's hear if anyone has had the problem in a plane other than a Spitfire Mk1A (100), and what airfield did you spawn at?

    Last edited by Baffin; Oct-05-2018 at 13:48.
    Windows 10 Pro 64-bit, ASUS TUF X299 MARK 1 (LGA 2066 R4), Intel Core i7 7800X, 32.0GB RAM@1386MHz (16-17-17-36), LG 55" 4K OLEDC7P TV, NVIDIA GeForce GTX 1080 Ti (MSI), 931GB Samsung SSD 960 EVO 1TB, 931GB Western Digital HD WD1002FAEX, Realtek High Definition Audio, Sony Surround amp for 5.1 speakers, Ear Buds for TeamSpeak3, ASUS Blu-Ray BW-12B1ST, TrackIR5, Buttkicker Gamer, Thrustmaster Warthog, Saitek X-52 (Trim & Gear), Saitek Pro Flight Combat Rudder Pedals, Voice Activated Controls. Overclock CPU: 4575, using BIOS features. Overclock GPU: +65/+300 (MSI Afterburner). Air Cooling (GPU:60°/CPU:58°). Using NVIDIA color settings: Highest-8bpc/YCbCr444-Limited. PhysX Processor: CPU.

  29. Likes TNScones liked this post
  30. #20
    Supporting Member TNScones's Avatar
    Join Date
    Sep 2016
    Location
    United Kingdom
    Posts
    242
    Post Thanks / Like
    Total Downloaded
    0

    Re: RAF Reticle Issue

    Quote Originally Posted by Baffin View Post
    I just flew a bunch of tests that seem to suggest that this is related more to the departure airport, airplane or combination thereof, rather than the mission or my hardware/software. (Settings are now in my signature block, below)

    Example: Today, while flying "Operation Dynamo", the problem existed at Eastchurch with a Spitfire Mk 1A (100) every time. I switched to Oye-Plaige in a Spitfire Mk1 (100) and died four times from flak before finally destroying the convoy at Watten. The computer performed flawlessly but it was not just a different base, but also a different plane. Just to see, I spawned at Eastchurch a minute ago in a Spitfire Mk1 (100), and it looked perfect!

    Let's hear if anyone has had the problem in a plane other than a Spitfire Mk1A (100), and what airfield did you spawn at?

    Bingo!

    Multiplayer: Vsync - OFF,
    Airfield: Eastchurch,
    Aircraft: Spitfire Mk la (100 oct)

    Reticle: 'crayon' mode
    ---------------------------------------

    Multiplayer: Vsync - OFF,
    Airfield: Eastchurch,
    Aircraft: Hurricane I (100oct)

    Reticle: 'crayon' mode.
    ---------------------------------------

    Multiplayer: Vsync - OFF,
    Airfield: Canterbury,
    Aircraft: Spitfire Mk I (100oct),

    Reticle: 'crayon' mode.
    Last edited by TNScones; Oct-05-2018 at 15:00.

  31. Likes Baffin liked this post
  32. #21
    ATAG Server Operator ATAG_kiwiflieger's Avatar
    Join Date
    Jan 2017
    Location
    Top of the South, New Zealand
    Posts
    533
    Post Thanks / Like
    Total Downloaded
    72.04 MB

    Re: RAF Reticle Issue

    Can people having this issue confirm which Texture setting they are using in Cliffs graphics options and switch to 'Original' setting if not already? Also please try what Soldat suggested:
    Quote Originally Posted by ATAG_Soldat View Post
    How i have got around this - i play single player for a few minutes then go back to multi player - it seems to fix the problem 80% of the time
    I have also found this happens sometimes on single player
    EDIT: Disregard PM request, may be unrelated to ATAG missions.
    Thanks
    Last edited by ATAG_kiwiflieger; Oct-08-2018 at 07:57.


    "Speed is life. Altitude is life insurance. Surprise is key."


    AMD FX-4100 3.6GHz (OC to 4.1GHz) ~ 8GB RAM (DDR3 1333MHz) ~ ASUS GTX1050Ti Phoenix 4GB ~ 250GB WD HDD ~ 1080p 75Hz Viewsonic ~ Windows 10 Pro
    T.16000M ~ TWCS Throttle ~ TFRP Pedals ~ DIY IR Headtracker


  33. Likes TNScones liked this post
  34. #22
    Supporting Member
    Join Date
    Apr 2013
    Location
    Northwestern Virginia, USA
    Posts
    1,601
    Post Thanks / Like
    Total Downloaded
    127.26 MB

    Re: RAF Reticle Issue

    Apologies for the formatting. MS Word compatibility issue.

    Date Time (est) Mission Airplane Airfield VSynch/AA Condition

    07/18 1957 Dynamo Spitfire 1A (100 Oct) Canterbury Fast/Off Vague Gunsight & Surfaces
    10/3 Unknown Dynamo Spitfire 1A (100 Oct) Eastchurch Fast/Off Vague Gunsight & Surfaces
    Changed settings Off-ON/ 8-0 Problem went away
    10/4 Unknown Raiders 4.5.3 Spitfire 1A (100 Oct) Eastchurch Fast/Off Vague Gunsight & Surfaces
    10/4 1215 Raiders 4.5.3 Spitfire 1A (100 Oct) Eastchurch Fast/Off Vague Gunsight & Surfaces
    10/4 1220 Restarted computer to get same as above.
    10/4 1400 Steamworks Spitfire 1A (100 Oct) Eastchurch Fast/Off Clear, detailed gunsight& surfaces
    10/4 1430 Steamworks Spitfire 1A (100 Oct) Eastchurch Fast/Off Vague Surfaces, Gunsight OK
    10/4 1721 Relinquish Spitfire 1A (100 Oct) Carpique Fast/Off All clear
    10/5 0922 Means to an end Spitfire 1A (100 Oct) Unknown Fast/Off All clear
    10/5 1024 Dynamo Spitfire 1A (100 Oct) Eastchurch Fast/Off Vague Gunsight & Surfaces
    Epilepsy filter applied-no change
    Epilepsy filter removed-weak panel lines.
    10/5 1038 Dynamo Spitfire 1A (100 Oct) Canterbury Fast/Off Vague Gunsight & Surfaces
    Landed and respawned. Same detail problem
    Last edited by Baffin; Oct-07-2018 at 14:54.
    Windows 10 Pro 64-bit, ASUS TUF X299 MARK 1 (LGA 2066 R4), Intel Core i7 7800X, 32.0GB RAM@1386MHz (16-17-17-36), LG 55" 4K OLEDC7P TV, NVIDIA GeForce GTX 1080 Ti (MSI), 931GB Samsung SSD 960 EVO 1TB, 931GB Western Digital HD WD1002FAEX, Realtek High Definition Audio, Sony Surround amp for 5.1 speakers, Ear Buds for TeamSpeak3, ASUS Blu-Ray BW-12B1ST, TrackIR5, Buttkicker Gamer, Thrustmaster Warthog, Saitek X-52 (Trim & Gear), Saitek Pro Flight Combat Rudder Pedals, Voice Activated Controls. Overclock CPU: 4575, using BIOS features. Overclock GPU: +65/+300 (MSI Afterburner). Air Cooling (GPU:60°/CPU:58°). Using NVIDIA color settings: Highest-8bpc/YCbCr444-Limited. PhysX Processor: CPU.

  35. #23
    Ace No.401_Wolverine's Avatar
    Join Date
    Jan 2012
    Posts
    726
    Post Thanks / Like
    Total Downloaded
    966.2 KB

    Re: RAF Reticle Issue

    Err, looking through the signatures here it strikes me there may be a commonality already.

    How many people having this problem right now are running 1080ti cards?

  36. #24
    ATAG Member ATAG_Highseas's Avatar
    Join Date
    Feb 2016
    Location
    Peurto del Slade, UK
    Posts
    5,112
    Post Thanks / Like
    Total Downloaded
    526.76 MB

    Re: RAF Reticle Issue

    I noticed that as well. Not sure what TNscones is running.
    Last edited by ATAG_Highseas; Oct-08-2018 at 04:08.


    - ASUS ROG STRIX Z370-E - i7-8700k - ASUS GTX 1080 Ti ROG STRIX OC - 16GB Corsair Vengeance DDR4 3000MHz -
    - CORSAIR 850W RMx Series PSU - Noctua NH-U14S CPU Cooler -
    - Virpil T50 Mongoos with Warthog Grip plus Extension Set -
    - TM Warthog Throttle -
    - Slaw Device 109 Cam Rudder Pedals -
    - HighseasPeripherals(tm) - Engine Switch Panel - Munitions Switch Panel - Throttle Quadrant Trim Box -

    (Operated by a 1972 Standard Issue Talking Monkey)

  37. #25
    Ace TWC_Sp00k's Avatar
    Join Date
    Jun 2014
    Posts
    640
    Post Thanks / Like
    Total Downloaded
    338.31 MB

    Re: RAF Reticle Issue

    I run a 1080Ti with no issues. Haven’t adjusted the card, game runs at the same resolution of the monitor (27”)
    If anything, my recticle seems thinner and more defined than I remember tho lighter in colour. Never seems to be as bright as those I see in the Youtube vids.


    Capture.JPG
    Last edited by TWC_Sp00k; Oct-08-2018 at 09:09.

  38. Likes TNScones liked this post
  39. #26
    Supporting Member TNScones's Avatar
    Join Date
    Sep 2016
    Location
    United Kingdom
    Posts
    242
    Post Thanks / Like
    Total Downloaded
    0

    Re: RAF Reticle Issue

    Quote Originally Posted by ATAG_Highseas View Post
    I noticed that as well. Not sure what TNscones is running.
    I am running a 1080ti, dual monitor set up. The monitors are not of the same spec.

    Online yesterday:

    Map: English Channel 1940 Summer,
    Airfield: RAF Wilmington,
    Aircraft: Spitfire Mk I,
    Reticle: fuzzy
    -------------------------------------------
    Map: as above,
    Airfield: Redhill,
    Aircraft: Hurricane I (Rotol 100oct),
    Reticle: fuzzy
    -------------------------------------------

    Going to single player and returning to multiplayer repaired the reticle. Credit is here given to ATAG_Soldat.

    But why does doing this correct it?
    Last edited by TNScones; Oct-08-2018 at 08:42.

  40. Likes Baffin, ATAG_Soldat liked this post
  41. #27
    Supporting Member
    Join Date
    Apr 2013
    Location
    Northwestern Virginia, USA
    Posts
    1,601
    Post Thanks / Like
    Total Downloaded
    127.26 MB

    Re: RAF Reticle Issue

    Quote Originally Posted by TNScones View Post
    I am running a 1080ti, dual monitor set up. The monitors are not of the same spec.

    Online yesterday:

    Map: English Channel 1940 Summer,
    Airfield: RAF Wilmington,
    Aircraft: Spitfire Mk I,
    Reticle: fuzzy
    -------------------------------------------
    Map: as above,
    Airfield: Redhill,
    Aircraft: Hurricane I (Rotol 100oct),
    Reticle: fuzzy
    -------------------------------------------

    Going to single player and returning to multiplayer repaired the reticle. Credit is here given to ATAG_Soldat.

    But why does doing this correct it?
    Depending on your computer system, it doesn't always work. With mine, sometimes it does and sometimes it doesn't. Activating any of the options in the "Video Options" menu of CLoD sometimes will fix things, but mostly seems to be ineffective on my rig. The common thread seems to be ATAG, not our computers.

    Now that we have a new Windows update, Nvidia driver and, in my case, a new BIOS from ASUS, I'm sure things will change... hopefully for the better!
    Last edited by Baffin; Oct-10-2018 at 22:30.
    Windows 10 Pro 64-bit, ASUS TUF X299 MARK 1 (LGA 2066 R4), Intel Core i7 7800X, 32.0GB RAM@1386MHz (16-17-17-36), LG 55" 4K OLEDC7P TV, NVIDIA GeForce GTX 1080 Ti (MSI), 931GB Samsung SSD 960 EVO 1TB, 931GB Western Digital HD WD1002FAEX, Realtek High Definition Audio, Sony Surround amp for 5.1 speakers, Ear Buds for TeamSpeak3, ASUS Blu-Ray BW-12B1ST, TrackIR5, Buttkicker Gamer, Thrustmaster Warthog, Saitek X-52 (Trim & Gear), Saitek Pro Flight Combat Rudder Pedals, Voice Activated Controls. Overclock CPU: 4575, using BIOS features. Overclock GPU: +65/+300 (MSI Afterburner). Air Cooling (GPU:60°/CPU:58°). Using NVIDIA color settings: Highest-8bpc/YCbCr444-Limited. PhysX Processor: CPU.

  42. Likes ATAG_Soldat, TNScones liked this post
  43. #28
    Ace No.401_Wolverine's Avatar
    Join Date
    Jan 2012
    Posts
    726
    Post Thanks / Like
    Total Downloaded
    966.2 KB

    Re: RAF Reticle Issue

    Quote Originally Posted by Baffin View Post
    The common thread seems to be ATAG, not our computers.

    This bug occurs on other servers as well. It was occuring when flying on my own dedicated hosted server which is what started my looking into the issue in the first place. I haven't actually been on ATAG since before Blitz was released. I reinstalled the game to do a limited run of some of our old campaign missions for our group and some friends, running off of a new dedicated server I have access to and that's where I found the problem. I thought there might be a simple fix for it, but it appears to be elusive....
    Last edited by No.401_Wolverine; Oct-11-2018 at 16:12.

  44. Likes ATAG_Soldat, Baffin, TNScones liked this post
  45. #29
    ATAG Member
    Join Date
    May 2015
    Location
    Brisbane Australia
    Posts
    56
    Post Thanks / Like
    Blog Entries
    1
    Total Downloaded
    45.32 MB

    Re: RAF Reticle Issue

    Hi Guys

    I only have problems on 4 out of the 11 maps

    1 Operation Steamworks
    2 Sealion
    3 joy division
    4 Hellfire corner

    This problem only occurs on the ATAG server - This does not occur on any other games or any other servers
    This problem occurs whether playing Red or Blue

    I fix this problem by playing single player for a few minuets - or by unchecking the SSAO Box in the in game video settings

    other times everything re-appears after playing for 10-15 minuets.

    My resolution is - 3840 x2160 60 Hz Video card GTX 1080 Ti Monitor 32inch -4K Full Screen

    Hope this helps
    Cheers Soldat

  46. Likes TNScones liked this post
  47. #30
    ATAG Server Operator ATAG_kiwiflieger's Avatar
    Join Date
    Jan 2017
    Location
    Top of the South, New Zealand
    Posts
    533
    Post Thanks / Like
    Total Downloaded
    72.04 MB

    Re: RAF Reticle Issue

    Has anyone tried changing their texture setting in the graphics options to 'Original' and seeing if it still happens?


    "Speed is life. Altitude is life insurance. Surprise is key."


    AMD FX-4100 3.6GHz (OC to 4.1GHz) ~ 8GB RAM (DDR3 1333MHz) ~ ASUS GTX1050Ti Phoenix 4GB ~ 250GB WD HDD ~ 1080p 75Hz Viewsonic ~ Windows 10 Pro
    T.16000M ~ TWCS Throttle ~ TFRP Pedals ~ DIY IR Headtracker


Page 1 of 2 12 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •