Results 1 to 13 of 13

Thread: Mission Installation?

  1. #1
    ATAG Member ATAG_DRock's Avatar
    Join Date
    Feb 2013
    Location
    Ontario, Canada
    Posts
    3,185
    Post Thanks / Like
    Total Downloaded
    164.95 MB

    Mission Installation?

    Is there detailed instructions on installing these missions?

    I'd like to try a few, but I get lost whenever I attempt it, or it doesn't work right.

  2. #2
    ATAG Member ATAG_Freya's Avatar
    Join Date
    Jan 2013
    Location
    Lethbridge, Alberta
    Posts
    3,572
    Post Thanks / Like
    Total Downloaded
    16.16 MB

    Re: Mission Installation?

    Hey DRock! I think missions go in 1csoftclub/il-2 sturmovik cliffs of dover/missions/ *then either the single or multi folder - depending on what it is.




    edits it: The "mission" itself should be in a folder, and in that folder there will be .mis files, .cs files and probly more folders but it can vary, but as long as you got the 'main' mission folder, that's what counts. I do have a help line, and for just 2.99$/minute I can walk you through it. Slowly. Just shout! ~S~
    Last edited by ATAG_Freya; Jan-16-2020 at 00:09.

  3. Likes ATAG_Scones, ATAG_DRock, farley liked this post
  4. #3
    ATAG Member ATAG_DRock's Avatar
    Join Date
    Feb 2013
    Location
    Ontario, Canada
    Posts
    3,185
    Post Thanks / Like
    Total Downloaded
    164.95 MB

    Re: Mission Installation?

    Thanks, Freya.

    After unzipping files, do I need to keep them in their own folder, or just transfer them as they are?

    I tried installing the bombing accuracy map, but there is no pylon, and no distance from target call out. I could fly in that map, though. I was told the files should be kept together.

  5. #4
    ATAG Member ATAG_Freya's Avatar
    Join Date
    Jan 2013
    Location
    Lethbridge, Alberta
    Posts
    3,572
    Post Thanks / Like
    Total Downloaded
    16.16 MB

    Re: Mission Installation?

    OK I think I see it now, when you unzip the file you get a folder called 'bombsight practice'. INSIDE that folder is a folder of the same name, and that is the folder you want to cut and paste into your single mission folder in the path I mentioned above. That should work, lemme know if it doesn't and I'll test it out this eve. I need to practice up anyways...

    ~S~

  6. Likes ATAG_Scones, ATAG_DRock liked this post
  7. #5
    ATAG Member ATAG_Scones's Avatar
    Join Date
    Sep 2016
    Location
    United Kingdom
    Posts
    622
    Post Thanks / Like
    Total Downloaded
    104.88 MB

    Re: Mission Installation?

    Hey, DRock

    Here is a screenshot of my installation:



    Mission Installation.JPG

    How it looks in game:

    Mission Installation in Game.JPG

    The orange circles are the folders.

    Last edited by ATAG_Scones; Jan-16-2020 at 12:11.

  8. Likes ATAG_DRock liked this post
  9. #6
    ATAG Member ATAG_DRock's Avatar
    Join Date
    Feb 2013
    Location
    Ontario, Canada
    Posts
    3,185
    Post Thanks / Like
    Total Downloaded
    164.95 MB

    Re: Mission Installation?

    Thanks a lot, Guys. This is great info.

    Thanks to Oskar, too, for offering help.


    I’ll try this stuff this afternoon.
    Last edited by ATAG_DRock; Jan-16-2020 at 12:57.

  10. Likes ATAG_Scones liked this post
  11. #7
    Manual Creation Group ATAG_Noofy's Avatar
    Join Date
    Feb 2019
    Location
    Zulu +2
    Posts
    1,005
    Post Thanks / Like
    Total Downloaded
    802.57 MB

    Re: Mission Installation?

    Hey DRock,
    You may also want to try the below mission (credits to Rostic ).
    It puts you on a north heading at 5000m aligned with Coquelles runway in a He-111 (you can change to another type).
    There are markers on the airfield to measure distance between center of target and first bomb to last bomb in a series.
    Great for testing different series delays settings as you can visualize and measure the hits.
    Beware, there is a 15ms wind from the west.

    Bomber mission.zip
    Setup 1:
    Lenovo 10NK000TEX | i7 7700K @3.60GHz | 16.0 GB | Windows 10 Pro 64-Bit | NVIDIA GeForce GTX 1050 Ti
    T16000M FCS HOTAS | CH_PRO Pedals | TrackIR 5 | TeamSpeak 3.3.2 | TS Notifier 1.6.0h

    Setup 2:
    Gigabyte Z390 UD | i7 9700K @3.60GHz | 16.0 GB | Windows 10 Pro 64-Bit | NVIDIA GeForce GTX 1070 Ti
    TM Warthog HOTAS | Saitek pro rudder pedals | TrackIR 5 | TeamSpeak 3.3.2 | TS Notifier 1.6.0h

  12. Likes ATAG_DRock, rontaila liked this post
  13. #8
    ATAG Member ATAG_DRock's Avatar
    Join Date
    Feb 2013
    Location
    Ontario, Canada
    Posts
    3,185
    Post Thanks / Like
    Total Downloaded
    164.95 MB

    Re: Mission Installation?

    I may need a hand with extraction part. Not sure what to do here.

  14. #9
    Manual Creation Group ATAG_Noofy's Avatar
    Join Date
    Feb 2019
    Location
    Zulu +2
    Posts
    1,005
    Post Thanks / Like
    Total Downloaded
    802.57 MB

    Re: Mission Installation?

    Quote Originally Posted by ATAG_DRock View Post
    I may need a hand with extraction part. Not sure what to do here.
    What? Extract a zip file? Just double-click on it, no?...

    Otherwise try with this: https://www.7-zip.org/
    Last edited by ATAG_Noofy; Jan-16-2020 at 17:06.
    Setup 1:
    Lenovo 10NK000TEX | i7 7700K @3.60GHz | 16.0 GB | Windows 10 Pro 64-Bit | NVIDIA GeForce GTX 1050 Ti
    T16000M FCS HOTAS | CH_PRO Pedals | TrackIR 5 | TeamSpeak 3.3.2 | TS Notifier 1.6.0h

    Setup 2:
    Gigabyte Z390 UD | i7 9700K @3.60GHz | 16.0 GB | Windows 10 Pro 64-Bit | NVIDIA GeForce GTX 1070 Ti
    TM Warthog HOTAS | Saitek pro rudder pedals | TrackIR 5 | TeamSpeak 3.3.2 | TS Notifier 1.6.0h

  15. #10
    ATAG Member ATAG_DRock's Avatar
    Join Date
    Feb 2013
    Location
    Ontario, Canada
    Posts
    3,185
    Post Thanks / Like
    Total Downloaded
    164.95 MB

    Re: Mission Installation?

    I'll get someone's help on TS sometime.

  16. #11
    ATAG Member ATAG_DRock's Avatar
    Join Date
    Feb 2013
    Location
    Ontario, Canada
    Posts
    3,185
    Post Thanks / Like
    Total Downloaded
    164.95 MB

    Re: Mission Installation?

    OK, figured out the Bombsight Practice.


    Are the Campaign downloads done the same way, but in mission>Campaign folder?


    Still a few more questions, but easier on TS.


    Thanks again, Guys.

  17. #12
    ATAG Member ATAG_DRock's Avatar
    Join Date
    Feb 2013
    Location
    Ontario, Canada
    Posts
    3,185
    Post Thanks / Like
    Total Downloaded
    164.95 MB

    Re: Mission Installation?

    works!

    test1.jpg

  18. Likes ATAG_Noofy liked this post
  19. #13
    Manual Creation Group ATAG_Noofy's Avatar
    Join Date
    Feb 2019
    Location
    Zulu +2
    Posts
    1,005
    Post Thanks / Like
    Total Downloaded
    802.57 MB

    Re: Mission Installation?

    Quote Originally Posted by ATAG_DRock View Post
    works!

    test1.jpg
    56 meters. Not bad
    Setup 1:
    Lenovo 10NK000TEX | i7 7700K @3.60GHz | 16.0 GB | Windows 10 Pro 64-Bit | NVIDIA GeForce GTX 1050 Ti
    T16000M FCS HOTAS | CH_PRO Pedals | TrackIR 5 | TeamSpeak 3.3.2 | TS Notifier 1.6.0h

    Setup 2:
    Gigabyte Z390 UD | i7 9700K @3.60GHz | 16.0 GB | Windows 10 Pro 64-Bit | NVIDIA GeForce GTX 1070 Ti
    TM Warthog HOTAS | Saitek pro rudder pedals | TrackIR 5 | TeamSpeak 3.3.2 | TS Notifier 1.6.0h

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •