Originally Posted by
RAF74_Buzzsaw
This thread has been moved... please post your technical questions in the Technical Corner in future.
-----
Are you programming in the Thrustmaster software or in the game?
You cannot just program in the 3rd party software... you need to go into the game and enter the inputs.
So, although this may seem redundant, and with all due respect, but just to confirm once again how to program the AXES:
- Start the game
- Select 'Options'
- Select 'Controls'
- From the drop down tab in the center of the screen select 'Aircraft'
- From the drop down tab at top left of the screen select 'AXES'
- The first three elements in the column are 'Aileron', 'Elevator' and 'Rudder'.
- On the right of the 'Aileron' row is a 'Command' box. Double click on it.
- Now move your joystick left in the same way you would to use your ailerons. The Joystick should be recognized and come up as an entry in the 'Command' box. Click OK, and Accept.
- Follow the same steps with the 'Elevator' and 'Rudder' lines... moving the Joystick as if you were using the elevator, and the twist rudder as if you were using it. (or press on your rudder pedals)
Be careful not to trigger any other key or move your mouse after you have double clicked on the Command box... if you do, it will accept that key or the mouse as the input.
- Continue and program your throttle and brakes using the 'Throttle' or 'Brakes' lines further down the list. (if you have rudder pedals you can program right and left brakes... be careful to use the correct AXES for the brakes, not pushing the rudder, but instead, using the throttle tilt)
~V~
. Hat geklappt.
Reply With Quote
Bookmarks