Results 1 to 6 of 6

Thread: HOTAS Cougar wird nicht erkannt

  1. #1
    Student Pilot
    Join Date
    Jan 2013
    Posts
    10
    Post Thanks / Like
    Total Downloaded
    0

    HOTAS Cougar wird nicht erkannt

    Moin,
    Neuer Rechner- alles läuft nur HOTAS Cougar wird nicht erkannt. Was tun?
    Danke Euch schon mal im Voraus

  2. #2
    Novice Pilot FG28_matkenhaus's Avatar
    Join Date
    Oct 2013
    Location
    Germany
    Posts
    75
    Post Thanks / Like
    Total Downloaded
    1.46 MB

    Re: HOTAS Cougar wird nicht erkannt

    Hallo Gringo!

    Welches Betriebssystem?
    Cougar evtl. über USB-Hub ohne Stromversorgung angeschlossen? Wenn ja, dann mal direkt am Rechner stecken, oder einen USB-Hub mit Stromversorgung verwenden.

    Wird der Cougar in Windows nicht erkannt, oder nur in Clodo nicht?

    Sorry wegen der Fragen, aber nur so können wir helfen...

    Gruß
    matkenhauser

  3. #3
    varrattu
    Guest

    Re: HOTAS Cougar wird nicht erkannt

    Quote Originally Posted by FG28_matkenhaus View Post
    Hallo Gringo!

    Welches Betriebssystem? ...
    Klickst Du hier

    ~V~

  4. #4
    Student Pilot
    Join Date
    Jan 2013
    Posts
    10
    Post Thanks / Like
    Total Downloaded
    0

    Re: HOTAS Cougar wird nicht erkannt

    So, das zunächst bevor ich mich weiterer Kritik aussetze...

    Win10 Pro
    CPU: ASUS ROG Z390E-1151 v2
    INTEL Core i7-9700K
    GPU: GIGABYTE RTX 2080Ti Turbo Rev2.0 11GB
    Mem.: DDR4 Ram 32GB3000MHZ
    Thrustmaster HOTAS Cougar Ünext. Simpeds, TIR5

    Mal dumm gefragt: soll ich die o.g. Details am besten als Signatur anhängen? Ansonsten ist der Thrustmaster HOTAS Cougar mit seinen 15 Jahren lediglich USB2 abhängig, d.h. ohne extra Stroversorgung. Funktioniert bei DCS problemlos (und bisher auch mit altem System). "Blitz" ließ sich auf dem neuen System gemäß Tipp - mein Dank an dieser Stelle - problemlos neu installieren und läuft. Leider jedoch wird der Cougar nicht erkannt. Habe die Simulation längere Zeit nicht mehr genutzt und keine entsprechenden Hinweise auf Einbindung des Gerätes gefunden. Deshalb meine Frage.
    Im Voraus für eure Geduld und Hilfe dankend
    Hans

  5. #5
    Novice Pilot FG28_matkenhaus's Avatar
    Join Date
    Oct 2013
    Location
    Germany
    Posts
    75
    Post Thanks / Like
    Total Downloaded
    1.46 MB

    Re: HOTAS Cougar wird nicht erkannt

    Hier was aus einem anderen Thread zu gleichem Problem:

    Quote Originally Posted by RAF74_Buzzsaw View Post
    This thread has been moved... please post your technical questions in the Technical Corner in future.

    -----

    Are you programming in the Thrustmaster software or in the game?

    You cannot just program in the 3rd party software... you need to go into the game and enter the inputs.

    So, although this may seem redundant, and with all due respect, but just to confirm once again how to program the AXES:

    - Start the game

    - Select 'Options'

    - Select 'Controls'

    - From the drop down tab in the center of the screen select 'Aircraft'

    - From the drop down tab at top left of the screen select 'AXES'

    - The first three elements in the column are 'Aileron', 'Elevator' and 'Rudder'.

    - On the right of the 'Aileron' row is a 'Command' box. Double click on it.

    - Now move your joystick left in the same way you would to use your ailerons. The Joystick should be recognized and come up as an entry in the 'Command' box. Click OK, and Accept.

    - Follow the same steps with the 'Elevator' and 'Rudder' lines... moving the Joystick as if you were using the elevator, and the twist rudder as if you were using it. (or press on your rudder pedals)

    Be careful not to trigger any other key or move your mouse after you have double clicked on the Command box... if you do, it will accept that key or the mouse as the input.

    - Continue and program your throttle and brakes using the 'Throttle' or 'Brakes' lines further down the list. (if you have rudder pedals you can program right and left brakes... be careful to use the correct AXES for the brakes, not pushing the rudder, but instead, using the throttle tilt)
    Nur um sicherzugehen, dass der Ablauf der Belegung passt (ist ja bei jeder Sim immer irgendwie leicht abgewandelt... )

    Wenn das nicht nicht hinhaut, gibt es noch die Option, Clodo (restlos, d.h. inklusive den Softclub-Ordner im Dokumentenordner) zu deinstallieren und Clodo noch einmal neu zu installieren. Der Worst-Case wäre eine saubere Windows-Neuinstallation...
    Last edited by FG28_matkenhaus; Feb-17-2020 at 07:31.

  6. #6
    Student Pilot
    Join Date
    Jan 2013
    Posts
    10
    Post Thanks / Like
    Total Downloaded
    0

    Re: HOTAS Cougar wird nicht erkannt

    Danke allerseits. Hat geklappt.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •