Results 1 to 3 of 3

Thread: Button/axis/switch box - need a parts list?

  1. #1
    Novice Pilot
    Join Date
    Dec 2014
    Posts
    44
    Post Thanks / Like
    Total Downloaded
    0

    Button/axis/switch box - need a parts list?

    Hi all

    Been a long while, but I'm considering getting back into flight simming. When I am flight simming I usually play IL2 1946, CloD and DCS.

    A long while ago, about 7 to 10 years ago I made myself a rudimentary trim box, it consists of a black ABS project box, Leo Bodnar BU0836A board, 3 bourns 10 turn pots and some reasonable looking knobs attached to the pots.

    I wanted to make something a bit more elaborate, with toggle switches and buttons, but I didn't get that far.

    So, I'm looking at it again, but like before I'm lost as to what parts to buy.

    I'd like small toggle switches that can be pushed up for a function and down for a function (like selecting engines), and automatically returned to centre with no input when centred (i.e. a neutral position).

    I'd like small buttons that are pressed for on and are off when not pressed.

    I'd like larger button for an engine start function, something about 25mm in diameter.

    I'd also like to attach an LED to the Bodnar board to show that it's on when plugged in.

    I'd also like something to use for things like flaps, not just for up or down, but with various degrees in between, but I don't want a big lever, just something small - I'm thinking rotary encoder with a dial already on it, but again I don't know what I'm looking for.


    Would anyone here be able to help me out with a parts list and some links to the items and some instructions if possible of how to do the LED?


    Thanks in advance.

  2. #2
    Supporting Member
    Join Date
    Oct 2018
    Location
    Toronto, Ontario
    Posts
    241
    Post Thanks / Like
    Total Downloaded
    3.85 GB

    Re: Button/axis/switch box - need a parts list?

    I’m sure you get real satisfaction from making your own equipment, but you should be aware that Gear Falcon makes a very nice trim box with actuators. He advertises in the hardware section of these forums, on Etsy and his own website. If you still prefer to make your own, he might be a source of advice as I’ve seen images of units under construction. Paul
    Desktop - Alienware R10, AMD Ryzen 9 5950X, 64Gb DDR4-3400Mhz OC 3734Mhz, Dell RTX 3090 24Gb (512.15), Dell 3221QS (4K @ 60Hz), Win 11 (22000.567), C Drive Steam default, Reverb G2, WMR SteamVR beta - 100% (3160x3088), TM Warthog Throttle/Stick, TM T-Rudder, TM MFDx2, Razer Tartarus Pro
    Laptop - Dell G7 7590, Intel i7-8750H, 64Gb DDR-2666Mhz, GPU0 Intel UHD 630 1Gb GPU1 Dell RTX 2060 6Gb (512.15), BenQ EX3203R (3K @ 60Hz), Win 11 (22000.567), C drive Steam default, Samsung Odyssey+, WMR SteamVR beta - 100% (1440x1796), TM T16000M, TM TWCS

  3. Likes ATAG_Snapper, ATAG_Bubba liked this post
  4. #3
    Supporting Member
    Join Date
    May 2015
    Location
    Bucharest Romania
    Posts
    124
    Post Thanks / Like
    Total Downloaded
    634.51 MB

    Re: Button/axis/switch box - need a parts list?

    Hi Raven,
    I modified a Saitek X45 with a module that supports MMjoy2, read the attached link, you may find something that inspires you https://simhq.com/forum/ubbthreads.php/topics/4038476/1. Success
    First come ,last left
    My rig : Win 10 pro 64 bit; Mb Gigabyte B560M AORUS PRO ,I5 11400F @4,2GHz,gc MSI GEFORCE GTX 1080 8 Gb,16 GB CORSAIR VENGEANCE DDR4 ,SSD Transcend 240 Gb, Gigabite G32QC ,Vkb Gladiator Pro,MMJOY2 home made pedals and gas , TrackIR 5. Steam ID: YR-DAN

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •