Results 1 to 14 of 14

Thread: Saitek X52 Pro profile without TrackIR

  1. #1
    Student Pilot
    Join Date
    Apr 2013
    Posts
    11
    Post Thanks / Like
    Total Downloaded
    0

    Saitek X52 Pro profile without TrackIR

    Hi there,


    So I ordered IL-2 COD and installed the Team Fusion 3.0 patch. Everything seems to work correctly, except I purchased my joystick just recently so I have no profile yet to use as a basis for COD. I read several times that it'll be very long to configure, and I'm not surprised. My problem is that I have absolutely no experience with joysticks and flight sims so far, so I wouldn't know which actions to bind, nor have I any experience on how to bind them conveniently (for optimal handling).

    Is there someone here with a Saitek X52 Pro who could share his profile? I would use it as a basis for a while just to get used to the joystick gameplay and the sim commands, and perhaps later I'll decide to change a few things for myself based on my experience and habits, but I first have to learn how everything works.

    I have no pedals (but the X52 Pro has rudder control included in the joystick by twisting it clockwise or counter-clockwise) nor TrackIR. If someone has a profile but mapped in conjunction with a TrackIR device, that'll do the job too, I'll just edit it to set free view on one of the directional sticks, so don't hesitate to share it!

    Many thanks in advance for your help! If it's of any use, I plan to pilot a Spitfire Mk IIa, but that won't be the only aircraft I want to try, and even if your profile is for another ship, it will make a very good basis for at least getting into the game.

    By the way, isn't there a "Joystick profils sharing" subsection on this forum? I was thinking it could be useful to a lot of people (and incidently increase the rate of page visits around there, as I'm sure there are many people trying Google requests on "[brand of their joystick] profile Cliffs of Dover")...
    Last edited by Kabouik; Apr-12-2013 at 09:58.

  2. #2
    Supporting Member Muffin's Avatar
    Join Date
    Oct 2012
    Location
    UK - Kent
    Posts
    276
    Post Thanks / Like
    Blog Entries
    1
    Total Downloaded
    0

    Re: Saitek X52 Pro profile without TrackIR

    I sent you a pm


    Never was so much owed by so many to so few -Winston Churchill

    Setup: i7 - 4.6Ghz - 16gb Corsair Ram - Nvidia Gtx 680 2GB -Trackir5 - Hotas Warthog - CH Eclipse Yoke - Saitek Pro Combat Rudder Pedals - Saitek Throttle Quad

  3. #3
    Student Pilot
    Join Date
    Apr 2013
    Posts
    11
    Post Thanks / Like
    Total Downloaded
    0

    Re: Saitek X52 Pro profile without TrackIR

    Replied, thanks! :]

  4. #4
    Student Pilot
    Join Date
    Apr 2013
    Posts
    11
    Post Thanks / Like
    Total Downloaded
    0

    Re: Saitek X52 Pro profile without TrackIR

    Alright, so thanks to the PMs I've received, I've managed to configure the joystick according to my preferences (without the Saitek software, I did it directly in COD). There is still something I want to do and I can't find how to do it.

    I have no TrackIR and I find the directional hats on the stick are not convenient, because the 8 directions are 0/1 inputs. I prefer analog setting, just like the mouse when we middle click and drag. I would like to use the mouse stick on the throttle lever to do so, and preferably without modifier key. Here is how I'd like it to work:

    - I move the stick, the independent view moves smoothly;
    - I click the left button just beside the stick, it turns off independent view, and the mouse sticks then controls the cursor (to show tooltips on the cockpit).

    The click switch does work, I can switch between independent view and cursor mode correctly. However when I move the stick, nothing happens in COD, in both modes. In the Windows Control Panel (joystick's calibration window), the mouse stick actually moves in the bottom right square (mouse X/Y). What I am missing for it to be recognized as a mouse in COD?
    Last edited by Kabouik; Apr-13-2013 at 16:36.

  5. #5
    Ace 1lokos's Avatar
    Join Date
    Jan 2012
    Posts
    5,323
    Post Thanks / Like
    Total Downloaded
    1.04 GB

    Re: Saitek X52 Pro profile without TrackIR

    CloD don't allow map this directly since POV can't be controlled with axis.
    You need use Saitek software to make throttle "stick" emulate mouse movement.

    Possible alternatives: Use JoyToKey to do the same thing, or NewView.

    Sokol1

  6. #6
    Supporting Member Muffin's Avatar
    Join Date
    Oct 2012
    Location
    UK - Kent
    Posts
    276
    Post Thanks / Like
    Blog Entries
    1
    Total Downloaded
    0

    Re: Saitek X52 Pro profile without TrackIR

    This is a tutorial for movement with the stick, you just set it for view movement instead of zoom



    Never was so much owed by so many to so few -Winston Churchill

    Setup: i7 - 4.6Ghz - 16gb Corsair Ram - Nvidia Gtx 680 2GB -Trackir5 - Hotas Warthog - CH Eclipse Yoke - Saitek Pro Combat Rudder Pedals - Saitek Throttle Quad

  7. #7
    Student Pilot
    Join Date
    Apr 2013
    Posts
    11
    Post Thanks / Like
    Total Downloaded
    0

    Re: Saitek X52 Pro profile without TrackIR

    Thanks. Actually what I did was OK, I just figured out that I had to close the Joystick properties window (in Config panel) so that the mouse stick actually works in other windows... I had nothing to change then. Still using the X52 "left click" as a switch between cursor and view modes, and the mouse stick to move. Works great. Next improvement will be a TrackIR, but not now.

  8. #8
    Student Pilot
    Join Date
    Jul 2013
    Posts
    1
    Post Thanks / Like
    Total Downloaded
    0

    Re: Saitek X52 Pro profile without TrackIR

    Hej!

    Can i get the same PM pls?

  9. #9
    Student Pilot
    Join Date
    Sep 2013
    Posts
    3
    Post Thanks / Like
    Total Downloaded
    0

    Re: Saitek X52 Pro profile without TrackIR

    Hello,

    Just discovered this thread as I am in the same boat; new to CLOD and just picked up an X52 Pro, could someone direct me to a profile I could use? Thanks in advance.

  10. #10
    Ace
    Join Date
    May 2013
    Location
    Stamford, Lincs, UK
    Posts
    1,033
    Post Thanks / Like
    Blog Entries
    8
    Total Downloaded
    7.46 MB

    Re: Saitek X52 Pro profile without TrackIR

    Quote Originally Posted by Muffin View Post
    This is a tutorial for movement with the stick, you just set it for view movement instead of zoom

    I can't get this to work. My "button" for POV adjustment works, but the mouse "stick" movement fails to do anything. It (the mouse stick) does work in the profiler so it's not broken. Can anyone suggest what I've done wrong as it seems such a simple tutorial and set up I can't believe I've buggered it up lol.

  11. #11
    Student Pilot
    Join Date
    Apr 2014
    Location
    NL
    Posts
    2
    Post Thanks / Like
    Total Downloaded
    0

    Re: Saitek X52 Pro profile without TrackIR

    Hello,
    I feel free to join the question of Kabouik.

    I've got the x52 Pro but can't get it working in CoD (v4.3, windows 7 64bit). CoD doesn't see the joystick very well and it's the only game i have this problem. And yes i have the latest drivers.
    Please, can somebody send me the profile (and confUser.ini) ? Thanks a lot. BtW, do you need to clean ....\Documents\1C SoftClub\il-2 sturmovik cliffs of dover - MOD\cache and more/other folders?

    Thanks again.

  12. #12
    Student Pilot
    Join Date
    Apr 2013
    Posts
    11
    Post Thanks / Like
    Total Downloaded
    0

    Re: Saitek X52 Pro profile without TrackIR

    Hi there,


    I finally managed to purchase a TrackIR, but I kept my configuration almost unchanged (because I was lazy), so here it what it looks like:

    X52 Pro - COD 2013-04-15_022848.jpg

    (Mixture lever does not work well if I recall correctly, so I tended to use the mouse to move the lever in the aircraft... Or I didn't change mixture at all, I'm not experienced enough yet!)

    I am not quite sure my Saitek profile and my confUser.ini files are still 100% like on the picture. I actually think I did change a few things (but don't remember what because I don't play much these days, a lot of work), but they should be pretty close. And anyway, the picture was made before I got the TrackIR. It was working, but it was still frustrating to move the view with hands without a mouse. I am not an advanced played, so you should expect some functions not to be assigned!

    confUser.ini from D:\1C SoftClub\il-2 sturmovik cliffs of dover - MOD:
    Code:
    [BOB]
      hotkeys = HotKey BOB
      difficulty=131072
      lastSingleMiss=missions/Single/Bomber Intercept - Ships.mis
    
    [HotKey BOB]
    S=static
    Alt F4=exit
    P=pause
    L=land
    Alt X=exit
    PrintScreen=ScreenShot
    
    
    [Config viewSet]
    AzimutSpeed=0.1
    TangageSpeed=0.1
    LenSpeed=0.1
    MinLen=1.0
    DefaultLen=20.0
    MaxLen=30000.0
    Speed=6
    Offset=2
    
    [DashBoard]
    0=1 153.600 0.000 0.600
    1=1 870.400 0.000 0.600
    2=1 0.000 281.600 0.500
    3=1 0.000 153.600 0.500
    4=1 0.000 409.600 0.500
    5=1 870.400 153.600 0.600
    6=1 870.400 307.200 0.600
    7=1 716.800 0.000 0.600
    8=1 0.000 0.000 0.600
    
    [HotKey gui]
      Escape = activate
      MouseRight = popupmenu
    
    
    [HotKey Console]
    ;BackQuote=Activate
    Control Tab =Activate
    
    
    [FreeFly]
    MouseLeft=ResetView
    A=Azimut-
    D=Azimut+
    S=Tangage+
    W=Tangage-
    Q=Kren-
    E=Kren+
    V=Speed+
    C=Speed-
    
    [FreeFly Config]
    AzimutView=1.0
    TangageView=1.0
    SpeedAzimut=50.0
    SpeedTangage=50.0
    SpeedKren=50.0
    MaxSpeed=1000.0
    Acselerate=100.0
    
    [HookViewFly Config]
    timeFirstStep=2.0
    deltaZ=10.0
    
    
    [FreeFlyXYZ]
    Left=Y+
    Right=Y-
    Down=X-
    Up=X+
    Home=Z+
    End=Z-
    Delete=A-
    PageDown=A+
    Control Left=SpeedMul
    Control Right=SpeedMul
    Control Down=SpeedMul
    Control Up=SpeedMul
    Control Home=SpeedMul
    Control End=SpeedMul
    Control Delete=SpeedMul
    Control PageDown=SpeedMul
    
    [FreeFlyXYZ Config]
    SpeedXYZ=20.0
    SpeedAzimut=20.0
    SpeedMul=0.1
    
    
    [HotKey artillery_gunner]
    Up = GunUp
    Down = GunDown
    Right = GunRight
    Left = GunLeft
    Space = GunFire
    S= StopMovement
    M= StartMovement
    F = FastTracking
    T = FineTrackig
    
    [Config pilotMove]
    aileron=1 0.01 0.02
    elevator=1 0.01 0.02
    rudder=1 0.02 0
    trimaileron=0 0
    trimelevator=0 0
    trimrudder=0 0
    throttle=0.05 0.95 0.02 0.02 0.02
    pitch=0 0
    mix=0 0
    compressor=0 0
    oilradiator=0 0
    radiator=0 0
    flaps=0 0
    underc=0 0
    brakes=0 0
    throttle0=0 0 0 0 0
    throttle1=0 0 0 0 0
    throttle2=0 0 0 0 0
    throttle3=0 0 0 0 0
    throttle4=0 0 0 0 0
    throttle5=0 0 0 0 0
    throttle6=0 0 0 0 0
    throttle7=0 0 0 0 0
    pitch0=0 0
    pitch1=0 0
    pitch2=0 0
    pitch3=0 0
    pitch4=0 0
    pitch5=0 0
    pitch6=0 0
    pitch7=0 0
    mix0=0 0
    mix1=0 0
    mix2=0 0
    mix3=0 0
    mix4=0 0
    mix5=0 0
    mix6=0 0
    mix7=0 0
    radiator0=0 0
    radiator1=0 0
    radiator2=0 0
    radiator3=0 0
    radiator4=0 0
    radiator5=0 0
    radiator6=0 0
    radiator7=0 0
    oilradiator0=0 0
    compressor0=0 0
    oilradiator1=0 0
    compressor1=0 0
    compressor2=0 0
    oilradiator2=0 0
    compressor3=0 0
    oilradiator3=0 0
    oilradiator4=0 0
    compressor4=0 0
    oilradiator5=0 0
    compressor5=0 0
    oilradiator6=0 0
    compressor6=0 0
    compressor7=0 0
    oilradiator7=0 0
    bombbaydoor=0 0
    impellerretr=0 0
    airbrake=0 0
    carbheater=0 0
    carbheater0=0 0
    carbheater1=0 0
    carbheater2=0 0
    carbheater3=0 0
    carbheater4=0 0
    carbheater5=0 0
    carbheater6=0 0
    carbheater7=0 0
    leslats=0 0
    brakeslt=0 0
    brakesrt=0 0
    throttle_wep=0 0
    
    [Config turretMove]
    turretyaw=0.5 0 0
    turretpitch=0.5 0 0
    
    [HotKey vehicleDriver]
    Control S=start_movement
    Alt S=stop_movement
    Control D=toggle_dir
    Down=brake
    Right=turn_right
    Up=accelerate
    Left=turn_left
    Alt D=toggle_hand_brake
    
    [HotKey vehicleGunner]
    Space=gun_fire
    [Config vehicleMove]
    ower=0 0.9 0 0 0
    power=0 0.9 0 0 0
    
    [HotKey camposMouseXYZ]
    MouseLeft=AT
    MouseRight=XYZmove
    F7=SpeedFast
    F6=SpeedNormal
    F5=SpeedSlow
    F8 MouseLeft=Kmove
    
    [LastFocus]
    969305076=bExtras
    -1332861808=bStatistic
    -1137074434=bRealism
    1899961994=bQuickMission
    -372350066=bServer
    628377810=training5
    1862295808=bControls
    2134622242=bBuilder
    2084280354=bExtras
    
    [HotKey pilotMove]
    Joystick1+AXE_Z=1rudder
    Joystick+AXE_Z=-1throttle
    Joystick2+AXE_Y=1elevator
    Joystick2+AXE_X=1aileron
    
    [HotKey view]
    Control F2=outsideViewNextEnemy
    Control F1=toggleShowCabin
    Y=padlockViewPrev
    Alt F7=outsideViewEnemyDirectGround
    U=padlockViewNext
    Alt F6=outsideViewEnemyDirectAir
    Alt F2=outside
    Alt F1=inside
    M=toggleShowMirror
    C=nextCabin
    Shift C=changeCabin
    Control C=prevCabin
    Alt 9=cabin9
    Alt 8=cabin8
    Alt 7=cabin7
    Joystick2+Key3=padlockViewForward
    Alt 6=cabin6
    Alt 5=cabin5
    Alt 4=cabin4
    Alt 3=cabin3
    F8=outsideViewFollow
    Alt 2=cabin2
    F7=outsideViewEnemyGround
    Alt 1=cabin1
    F6=outsideViewEnemyAir
    F5=padlockViewGround
    F4=padlockView
    F3=outsideViewFly
    F2=outsideView
    Shift F7=outsideViewFriendGround
    F1=insideView
    Shift F6=outsideViewFriendAir
    Shift F5=padlockViewFriendGround
    Shift F4=padlockViewFriend
    Shift F2=outsideViewNextPlane
    Shift F1=toggleAim
    
    [HotKey viewSet]
    Alt MouseLeft=DashBoard
    End=fov70
    PageDown=fov90
    Delete=fov30
    Mouse5=FOV
    MouseMiddle=Rotate
    F10=StartStop
    MouseRight=Len
    MouseLeft=Offset
    NumPad/=Reset
    
    [HotKey viewPan]
    NumPad-4=PanLeft2
    NumPad-3=PanRight3
    NumPad-2=PanDown
    NumPad-1=PanLeft3
    Pov225 Joystick+Pov=PanLeft3
    Pov270 Joystick+Pov=PanLeft2
    Pov315 Joystick+Pov=PanLeft
    Pov0 Joystick+Pov=PanUp
    Pov45 Joystick+Pov=PanRight
    Pov90 Joystick+Pov=PanRight2
    Pov135 Joystick+Pov=PanRight3
    NumPad-9=PanRight
    NumPad-8=PanUp
    Pov180 Joystick+Pov=PanDown
    NumPad-7=PanLeft
    NumPad-6=PanRight2
    NumPad-5=PanReset
    
    [HotKey viewSnap]
    NumPad-4=Snap_m2_0
    NumPad-3=Snap_3_0
    NumPad-2=Snap_0_m2
    NumPad-1=Snap_m3_0
    Pov225 Joystick2+Pov=Snap_m3_0
    Pov270 Joystick2+Pov=Snap_m2_0
    Pov315 Joystick2+Pov=Snap_m1_0
    Pov0 Joystick2+Pov=Snap_0_2
    Pov45 Joystick2+Pov=Snap_1_0
    Pov90 Joystick2+Pov=Snap_2_0
    F9=SnapPanSwitch
    Pov135 Joystick2+Pov=Snap_3_0
    Pov180 Joystick2+Pov=Snap_0_m1
    NumPad-9=Snap_1_0
    NumPad-8=Snap_0_0
    NumPad-7=Snap_m1_0
    NumPad-6=Snap_2_0
    NumPad-5=Snap_0_2
    
    [HotKey timeSpeed]
    CloseBracket=timeSpeedUp
    OpenBracket=timeSpeedDown
    Quote=timeSpeedNormal
    
    [HotKey common]
    O=door_open
    Shift L=csec_lights
    A=autopilot
    Control O=door_close
    Control L=cpri_lights
    Control J=door_jettison
    Control E=bailout
    Alt L=cste_lights
    MouseLeft=fire
    Control Space=door_toggle
    
    [HotKey pilot]
    Joystick1+Key1=trigger1
    Z=rudder_leftx
    X=rudder_rightx
    W=thtl_110
    Joystick+Key15=airbrake
    Control NumPad-9=site_alt_plus
    V=landingflaps_d
    Shift BackQuote=engselect_all
    Control NumPad-8=site_dist_plus
    T=thtl_psicutout
    Control NumPad-7=site_spd_plus
    Control NumPad-6=site_side_right
    R=rad_auto
    Control NumPad-5=site_auto
    Control NumPad-4=site_side_left
    Joystick2+Key0=trigger01
    Control NumPad-3=site_alt_minus
    Joystick+Key0=pitch_plus
    Control NumPad-2=site_dist_minus
    Control NumPad-1=site_spd_minus
    I=enginei01
    Joystick+Key14=trigger3
    G=uc
    Control Z=ruddert_left
    F=landingflaps_u
    Control X=ruddert_right
    Control W=abwurf_arm
    B=wheelbrakex
    Control T=thtl_slowcutout
    Equals=thtl_plus
    9=extinguisher
    6=rad_plus
    5=rad_minus
    Control G=uc_down_emer
    Shift 8=engselect_n7
    Joystick+Key12 Joystick+Key18=autorudder_off
    Shift 7=engselect_n6
    Shift 6=engselect_n5
    Control C=pilot_switch
    Shift 5=engselect_n4
    Control B=bombbaydoors
    Shift 4=engselect_n3
    Shift 3=engselect_n2
    Shift 2=engselect_n1
    Shift 1=engselect_n0
    Down=elevator_downx
    Right=aileron_rightx
    Up=elevator_upx
    Left=aileron_leftx
    Control 7=rudder_leftx
    Joystick+Key12 Joystick+Key17=autorudder_low
    Shift Down=elevatort_ndown
    Shift Right=aileront_right
    Space=trigger0
    Shift Up=elevatort_nup
    Shift Left=aileront_left
    Joystick+Key12 Joystick+Key16=autorudder_high
    Joystick1+Key3=trigger2
    Joystick+Key3=pitch_auto
    MouseLeft=MouseControl
    Underscore=thtl_minus
    Backspace=thtl_wep
    Joystick+Key2=pitch_minus
    
    [HotKey turret]
    Control O=trt_park_toggle
    Down=trt_mount_d
    Right=trt_mount_r
    Up=trt_mount_u
    Left=trt_mount_l
    Shift Down=trt_down
    Shift Right=trt_right
    Shift Up=trt_up
    Shift Left=trt_left
    
    [HotKey orders]
    9=order9
    8=order8
    7=order7
    6=order6
    5=order5
    4=order4
    3=order3
    2=order2
    1=order1
    0=order0
    Escape=deactivate
    Alt=select
    Control=expand
    Enter=Enter
    Tab=activate
    Backspace=Backspace
    
    [HotKey vehicle]
    Down=brake
    Right=turn_right
    Up=accelerate
    Left=turn_left
    Alt D=toggle_dir
    Space=fire
    
    [HotKey builder]
    NumPad-4=stepAzimut-15
    NumPad-3=stepAzimut30
    NumPad-1=stepAzimut-30
    NumPad-0=insert+
    Alt MouseRight=select-
    Alt MouseLeft=select+
    Alt Control=unselect
    A MouseLeft=battleArea
    Control Z=Undo
    Control Y=Redo
    Control X=cut
    Control V=paste
    Insert=insert+
    Control C=copy
    Control B=addBranch
    Home=change--
    End=change++
    PageDown=change+
    PageUp=change-
    Delete=delete+
    MouseRight=popupmenu
    F10=land
    MouseLeft=objectMove
    Shift MouseLeft=worldZoom
    Enter=freeView
    NumPad.=delete+
    Tab=cursor
    Backspace=cursor
    Alt Right=Forward
    Alt Left=Backward
    NumPad-9=stepAzimut5
    NumPad-8=resetTangage90
    NumPad-7=stepAzimut-5
    NumPad-6=stepAzimut15
    Control MouseRight=delete+
    NumPad-5=resetAngles
    Control MouseLeft=insert+
    
    [HotKey builderMouseXYZ]
    F4 MouseRight=Zmove
    F5 MouseLeft=Amove
    Mouse5=Amove
    MouseRight=XYmove
    MouseLeft=Len
    F6 MouseLeft=Tmove
    F3=SpeedFast
    F2=SpeedNormal
    F1=SpeedSlow
    F7 MouseLeft=Kmove
    
    [ChatWindow]
    0:-1=-posSize '0.003 0.870 0.206 0.130' -titleStr "Motor Controls" -alpha 130 -ualpha 0 -wrap -history 100
    0:262144=-lay 1 -fnt 0 -clr 0
    1:-1=-posSize '0.818 0.543 0.181 0.145' -titleStr "Secondary Controls" -alpha 130 -ualpha 0 -history 10 -timeout 15
    1:5=-font 0
    1:4=-font 0
    1:7=-font 0
    2:-1=-posSize '0.002 0.000 0.460 0.186' -titleStr "Info. Window 1" -alpha 130 -ualpha 25 -vscroll -wrap -history 100
    2:393216=-fnt 0 -clr 54 -al 2 -tf 1 -sz 1 -sl 1
    2:3=-font 0
    2:131072=0
    2:1=-font 0
    2:6=-font 0
    3:-1=-posSize '0.518 0.002 0.418 0.275' -titleStr Voice -border -alpha 130 -ualpha 0 -wrap -history 40 -timeout 30
    3:2=-font 1
    4:-1=-posSize '0.171 0.323 0.687 0.352' -titleStr NetStats -title -border -alpha 50 -ualpha 0 -custom
    4:-2=-font 3 -color 139 -columnWidth '0.100 0.183 0.322 0.144 0.093 0.081' -columnSort 2
    
    [MOD]
    ExtendCloudsDistance=yes
    You'll find the Saitek profile (pass: "CLOD" without the quotes) there. Please, rehost it somewhere, as the file will only be available for 30 days here.

    Hope it helps!
    Last edited by Kabouik; Apr-07-2014 at 15:02.

  13. #13
    Student Pilot
    Join Date
    Apr 2014
    Location
    NL
    Posts
    2
    Post Thanks / Like
    Total Downloaded
    0

    Re: Saitek X52 Pro profile without TrackIR

    Thanks Kabouik, I try and now I can fly.......

  14. #14
    Student Pilot
    Join Date
    Apr 2013
    Posts
    11
    Post Thanks / Like
    Total Downloaded
    0

    Re: Saitek X52 Pro profile without TrackIR

    Just in case, did anyone download the Saitek profile from my post... Five years ago?

    It is nowhere to be found on my computer, and I would like to resume playing IL-2, preferably with my old configuration without all controls configuration work before.

    [Edit] Found my profiles!

    I'll need to update the image showing the buttons. Meanwhile, here are the updated confUser.ini for Blitz (probably some functions missing for all aircrafts but I have to start somewhere) and the X52 Pro profile to paste in "C:\Users\Public\Documents\Logitech\X52 Professional"and use with Logitech's X52 Pro software:

    Code:
    [BOB]
      hotkeys = HotKey BOB
      difficulty=131072
      lastSingleMiss=missions/Single/Bomber Intercept - Ships.mis
    playerLastCountry=de
    enabledVoice=1
    enabledMusic=1
    ShowActorNames=0
    
    
    
    [Config viewSet]
    AzimutSpeed=0.1
    TangageSpeed=0.1
    LenSpeed=0.1
    MinLen=1.0
    DefaultLen=20.0
    MaxLen=30000.0
    Speed=6
    Offset=2
    
    [DashBoard]
    0=1 153.600 0.000 0.600
    1=1 870.400 0.000 0.600
    2=1 0.000 281.600 0.500
    3=1 0.000 153.600 0.500
    4=1 0.000 409.600 0.500
    5=1 870.400 153.600 0.600
    6=1 870.400 307.200 0.600
    7=1 716.800 0.000 0.600
    8=1 0.000 0.000 0.600
    
    [HotKey gui]
      Escape = activate
      MouseRight = popupmenu
    
    
    [HotKey Console]
    ;BackQuote=Activate
    Control Tab =Activate
    
    
    [FreeFly]
    MouseLeft=ResetView
    A=Azimut-
    D=Azimut+
    S=Tangage+
    W=Tangage-
    Q=Kren-
    E=Kren+
    V=Speed+
    C=Speed-
    
    [FreeFly Config]
    AzimutView=1.0
    TangageView=1.0
    SpeedAzimut=50.0
    SpeedTangage=50.0
    SpeedKren=50.0
    MaxSpeed=1000.0
    Acselerate=100.0
    
    [HookViewFly Config]
    timeFirstStep=2.0
    deltaZ=10.0
    
    
    [FreeFlyXYZ]
    Left=Y+
    Right=Y-
    Down=X-
    Up=X+
    Home=Z+
    End=Z-
    Delete=A-
    PageDown=A+
    Control Left=SpeedMul
    Control Right=SpeedMul
    Control Down=SpeedMul
    Control Up=SpeedMul
    Control Home=SpeedMul
    Control End=SpeedMul
    Control Delete=SpeedMul
    Control PageDown=SpeedMul
    
    [FreeFlyXYZ Config]
    SpeedXYZ=20.0
    SpeedAzimut=20.0
    SpeedMul=0.1
    
    
    [HotKey artillery_gunner]
    Up = GunUp
    Down = GunDown
    Right = GunRight
    Left = GunLeft
    Space = GunFire
    S= StopMovement
    M= StartMovement
    F = FastTracking
    T = FineTrackig
    
    [Config pilotMove]
    aileron=1 0.01 0.02
    elevator=1 0.01 0.02
    rudder=1 0.02 0
    trimaileron=0 0
    trimelevator=0 0
    trimrudder=0 0
    throttle=0.05 0.95 0.02 0.02 0.02
    pitch=0 0
    mix=0 0
    compressor=0 0
    oilradiator=0 0
    radiator=0 0
    flaps=0 0
    underc=0 0
    brakes=0 0
    throttle0=0 0 0 0 0
    throttle1=0 0 0 0 0
    throttle2=0 0 0 0 0
    throttle3=0 0 0 0 0
    throttle4=0 0 0 0 0
    throttle5=0 0 0 0 0
    throttle6=0 0 0 0 0
    throttle7=0 0 0 0 0
    pitch0=0 0
    pitch1=0 0
    pitch2=0 0
    pitch3=0 0
    pitch4=0 0
    pitch5=0 0
    pitch6=0 0
    pitch7=0 0
    mix0=0 0
    mix1=0 0
    mix2=0 0
    mix3=0 0
    mix4=0 0
    mix5=0 0
    mix6=0 0
    mix7=0 0
    radiator0=0 0
    radiator1=0 0
    radiator2=0 0
    radiator3=0 0
    radiator4=0 0
    radiator5=0 0
    radiator6=0 0
    radiator7=0 0
    oilradiator0=0 0
    compressor0=0 0
    oilradiator1=0 0
    compressor1=0 0
    compressor2=0 0
    oilradiator2=0 0
    compressor3=0 0
    oilradiator3=0 0
    oilradiator4=0 0
    compressor4=0 0
    oilradiator5=0 0
    compressor5=0 0
    oilradiator6=0 0
    compressor6=0 0
    compressor7=0 0
    oilradiator7=0 0
    bombbaydoor=0 0
    impellerretr=0 0
    airbrake=0 0
    carbheater=0 0
    carbheater0=0 0
    carbheater1=0 0
    carbheater2=0 0
    carbheater3=0 0
    carbheater4=0 0
    carbheater5=0 0
    carbheater6=0 0
    carbheater7=0 0
    leslats=0 0
    brakeslt=0 0
    brakesrt=0 0
    throttle_wep=0 0
    tankselector0=0 0
    tankselector1=0 0
    tankselector2=0 0
    tankselector3=0 0
    
    [Config turretMove]
    turretyaw=0.5 0 0
    turretpitch=0.5 0 0
    
    [HotKey vehicleDriver]
    Control S=start_movement
    Alt S=stop_movement
    Control D=toggle_dir
    Down=brake
    Right=turn_right
    Up=accelerate
    Left=turn_left
    Alt D=toggle_hand_brake
    
    [HotKey vehicleGunner]
    Space=gun_fire
    [Config vehicleMove]
    ower=0 0.9 0 0 0
    power=0 0.9 0 0 0
    
    [HotKey camposMouseXYZ]
    MouseLeft=AT
    MouseRight=XYZmove
    F7=SpeedFast
    F6=SpeedNormal
    F5=SpeedSlow
    F8 MouseLeft=Kmove
    
    [LastFocus]
    969305076=bExtras
    -1332861808=bStatistic
    -1137074434=bRealism
    1899961994=bQuickMission
    -372350066=bServer
    628377810=training5
    1862295808=bControls
    2134622242=bBuilder
    2084280354=bExtras
    951739832=bClient
    1027255808=bControls
    -248585130=bNet
    
    
    
    
    
    
    
    
    
    
    
    
    
    [HotKey builderMouseXYZ]
    F4 MouseRight=Zmove
    F5 MouseLeft=Amove
    Mouse5=Amove
    MouseRight=XYmove
    MouseLeft=Len
    F6 MouseLeft=Tmove
    F3=SpeedFast
    F2=SpeedNormal
    F1=SpeedSlow
    F7 MouseLeft=Kmove
    
    
    [MOD]
    ExtendCloudsDistance=yes
    [HotKey BOB]
    Alt F4=exit
    P=pause
    Alt X=exit
    PrintScreen=ScreenShot
    [HotKey common]
    X52_Professional_H.O.T.A.S.-53C8DF8D+Key23=cste_lights_inc
    O=door_open
    Shift L=csec_lights
    A=autopilot
    Control O=door_close
    X52_Professional_H.O.T.A.S.-53C8DF8D+Key13=door_toggle
    X52_Professional_H.O.T.A.S.-53C8DF8D+Key0 X52_Professional_H.O.T.A.S.-53C8DF8D+Key14=fire
    Control J=door_jettison
    Control E=bailout
    X52_Professional_H.O.T.A.S.-53C8DF8D+Key25=cpri_lights
    X52_Professional_H.O.T.A.S.-53C8DF8D+Key2=map
    [HotKey pilot]
    X52_Professional_H.O.T.A.S.-53C8DF8D+Key1=trigger3
    X52_Professional_H.O.T.A.S.-53C8DF8D+Key8=landingflaps_u
    Z=rudder_leftx
    Control NumPad-9=site_alt_plus
    Shift BackQuote=engselect_all
    Control NumPad-8=site_dist_plus
    Control NumPad-7=site_spd_plus
    Control NumPad-6=site_side_right
    Control NumPad-5=site_auto
    Control NumPad-4=site_side_left
    Control NumPad-3=site_alt_minus
    Control NumPad-2=site_dist_minus
    X52_Professional_H.O.T.A.S.-53C8DF8D+Key0=trigger0
    Control NumPad-1=site_spd_minus
    L=mix_minus
    X52_Professional_H.O.T.A.S.-53C8DF8D+Key7=thtl_psicutout
    I=enginei01
    Control Z=ruddert_left
    Control X=ruddert_right
    Control W=abwurf_arm
    B=wheelbrakex
    Control T=thtl_slowcutout
    X52_Professional_H.O.T.A.S.-53C8DF8D+Key6=thtl_wep
    Equals=thtl_plus
    Semicolon=mix_plus
    9=extinguisher
    X52_Professional_H.O.T.A.S.-53C8DF8D+Key0 X52_Professional_H.O.T.A.S.-53C8DF8D+Key14=trigger01
    6=rad_plus
    5=rad_minus
    Control G=uc_down_emer
    Shift 8=engselect_n7
    Shift 7=engselect_n6
    Shift 6=engselect_n5
    Control C=pilot_switch
    Shift 5=engselect_n4
    Control B=bombbaydoors
    Shift 4=engselect_n3
    Shift 3=engselect_n2
    X52_Professional_H.O.T.A.S.-53C8DF8D+Key12=fenster_toggle
    Shift 2=engselect_n1
    Shift 1=engselect_n0
    Down=elevator_downx
    X52_Professional_H.O.T.A.S.-53C8DF8D+Key26=wheelbrakeltx
    Right=aileron_rightx
    Up=elevator_upx
    Left=aileron_leftx
    Control 7=rudder_leftx
    Shift Right=aileront_right
    X52_Professional_H.O.T.A.S.-53C8DF8D+Key11=uc
    Shift Left=aileront_left
    X52_Professional_H.O.T.A.S.-53C8DF8D+Key25=rad_auto
    X52_Professional_H.O.T.A.S.-53C8DF8D+Key3=pitch_m_togl
    MouseLeft=MouseControl
    Underscore=thtl_minus
    X52_Professional_H.O.T.A.S.-53C8DF8D+Key24=wheelbrakertx
    NumPad-=elevatort_ndown
    NumPad+=elevatort_nup
    X52_Professional_H.O.T.A.S.-53C8DF8D+Key9=landingflaps_d
    [HotKey turret]
    Control O=trt_park_toggle
    Down=trt_mount_d
    Right=trt_mount_r
    Up=trt_mount_u
    Left=trt_mount_l
    Shift Down=trt_down
    Shift Right=trt_right
    Shift Up=trt_up
    Shift Left=trt_left
    [HotKey view]
    Control F2=outsideViewNextEnemy
    Y=padlockViewPrev
    Alt F7=outsideViewEnemyDirectGround
    U=padlockViewNext
    Alt F6=outsideViewEnemyDirectAir
    Alt F2=outside
    Alt F1=inside
    M=toggleShowMirror
    C=nextCabin
    Shift C=changeCabin
    Control C=prevCabin
    X52_Professional_H.O.T.A.S.-53C8DF8D+Key4=toggleAim
    Alt 9=cabin9
    Alt 8=cabin8
    Alt 7=cabin7
    Alt 6=cabin6
    Alt 5=cabin5
    X52_Professional_H.O.T.A.S.-53C8DF8D+Key3=toggleShowCabin
    Alt 4=cabin4
    Alt 3=cabin3
    F8=outsideViewFollow
    Alt 2=cabin2
    F7=outsideViewEnemyGround
    Alt 1=cabin1
    F6=outsideViewEnemyAir
    F5=padlockViewGround
    F4=padlockView
    F3=outsideViewFly
    F2=outsideView
    Shift F7=outsideViewFriendGround
    F1=insideView
    Shift F6=outsideViewFriendAir
    Shift F5=padlockViewFriendGround
    Shift F4=padlockViewFriend
    Shift F2=outsideViewNextPlane
    [HotKey viewSet]
    Alt MouseLeft=DashBoard
    X52_Professional_H.O.T.A.S.-53C8DF8D+Key22=fov70
    X52_Professional_H.O.T.A.S.-53C8DF8D+Key21=Reset
    X52_Professional_H.O.T.A.S.-53C8DF8D+Key20=fov90
    X52_Professional_H.O.T.A.S.-53C8DF8D+Key19=fov30
    Mouse5=FOV
    MouseMiddle=Rotate
    F10=StartStop
    MouseRight=Len
    MouseLeft=Offset
    Control F9=TrackIR
    [HotKey viewPan]
    NumPad-4=PanLeft2
    NumPad-3=PanRight3
    NumPad-2=PanDown
    NumPad-1=PanLeft3
    Pov225 X52_Professional_H.O.T.A.S.-53C8DF8D+Pov=PanLeft3
    Pov270 X52_Professional_H.O.T.A.S.-53C8DF8D+Pov=PanLeft2
    Pov90=PanRight2
    Pov315 X52_Professional_H.O.T.A.S.-53C8DF8D+Pov=PanLeft
    Pov0 X52_Professional_H.O.T.A.S.-53C8DF8D+Pov=PanUp
    Pov45 X52_Professional_H.O.T.A.S.-53C8DF8D+Pov=PanRight
    Pov90 X52_Professional_H.O.T.A.S.-53C8DF8D+Pov=PanRight2
    Pov135 X52_Professional_H.O.T.A.S.-53C8DF8D+Pov=PanRight3
    NumPad-9=PanRight
    NumPad-8=PanUp
    Pov180 X52_Professional_H.O.T.A.S.-53C8DF8D+Pov=PanDown
    NumPad-5=PanReset
    [HotKey viewSnap]
    NumPad-4=Snap_m2_0
    NumPad-3=Snap_3_0
    NumPad-2=Snap_0_m2
    NumPad-1=Snap_m3_0
    Pov315=Snap_m1_0
    Pov270=Snap_m2_0
    Pov225=Snap_m3_0
    Pov180=Snap_0_m1
    Pov135=Snap_3_0
    Pov90=Snap_2_0
    Pov45=Snap_1_0
    Pov0=Snap_0_2
    F9=SnapPanSwitch
    NumPad-9=Snap_1_0
    NumPad-8=Snap_0_0
    NumPad-7=Snap_m1_0
    NumPad-6=Snap_2_0
    NumPad-5=Snap_0_2
    [HotKey timeSpeed]
    CloseBracket=timeSpeedUp
    OpenBracket=timeSpeedDown
    Quote=timeSpeedNormal
    [HotKey orders]
    9=order9
    8=order8
    7=order7
    6=order6
    5=order5
    4=order4
    3=order3
    2=order2
    1=order1
    0=order0
    Escape=deactivate
    Alt=select
    Control=expand
    Enter=Enter
    Tab=activate
    Backspace=Backspace
    [HotKey chat]
    Enter=send
    Tab=showHideNetStats
    [HotKey builder]
    NumPad-4=stepAzimut-15
    NumPad-3=stepAzimut30
    NumPad-1=stepAzimut-30
    NumPad-0=insert+
    Alt MouseRight=select-
    Alt MouseLeft=select+
    Alt Control=unselect
    A MouseLeft=battleArea
    Control Z=Undo
    Control Y=Redo
    Control X=cut
    Control V=paste
    Insert=insert+
    Control C=copy
    Control B=addBranch
    Home=change--
    End=change++
    PageDown=change+
    PageUp=change-
    Delete=delete+
    MouseRight=popupmenu
    F10=land
    MouseLeft=objectMove
    Shift MouseLeft=worldZoom
    Enter=freeView
    NumPad.=delete+
    Tab=cursor
    Backspace=cursor
    Alt Right=Forward
    Alt Left=Backward
    NumPad-9=stepAzimut5
    NumPad-8=resetTangage90
    NumPad-7=stepAzimut-5
    NumPad-6=stepAzimut15
    Control MouseRight=delete+
    NumPad-5=resetAngles
    Control MouseLeft=insert+
    [HotKey vehicle]
    Down=brake
    Right=turn_right
    Up=accelerate
    Left=turn_left
    Alt D=toggle_dir
    Space=fire
    [HotKey pilotMove]
    X52_Professional_H.O.T.A.S.-53C8DF8D+AXE_RZ=1rudder
    X52_Professional_H.O.T.A.S.-53C8DF8D+AXE_RY=1trimrudder
    X52_Professional_H.O.T.A.S.-53C8DF8D+AXE_RX=1trimaileron
    X52_Professional_H.O.T.A.S.-53C8DF8D+AXE_Z=-1throttle
    X52_Professional_H.O.T.A.S.-53C8DF8D+AXE_Y=1elevator
    X52_Professional_H.O.T.A.S.-53C8DF8D+AXE_X=1aileron
    X52_Professional_H.O.T.A.S.-53C8DF8D+AXE_U=-1pitch
    [ChatWindow]
    0:-1=-posSize '0.818 0.488 0.181 0.131' -titleStr "Secondary Controls" -alpha 130 -ualpha 0 -history 10 -timeout 15
    0:5=-font 0
    0:4=-font 0
    0:7=-font 0
    1:-1=-posSize '0.003 0.783 0.206 0.117' -titleStr "Motor Controls" -alpha 130 -ualpha 0 -wrap -history 100
    1:262144=-lay 1 -fnt 0 -clr 0
    2:-1=-posSize '0.518 0.002 0.418 0.248' -titleStr Voice -border -alpha 130 -ualpha 0 -wrap -history 40 -timeout 30
    2:2=-font 1
    3:-1=-posSize '0.002 0.000 0.460 0.168' -titleStr "Info. Window 1" -alpha 130 -ualpha 25 -vscroll -wrap -includeTime -history 100
    3:7=-font 3
    3:3=-font 3
    3:393216=-fnt 3 -clr 0 -al 2 -tf 1 -sz 0 -sl 1
    3:1=-font 0
    3:131072=0
    3:6=-font 0
    4:-1=-posSize '0.564 0.000 0.435 0.233' -titleStr NetStats -title -border -alpha 50 -ualpha 0 -custom
    4:-2=-font 3 -color 139 -columnWidth '0.116 0.210 0.361 0.163 0.110 0.040' -columnSort 2
    Attached Files Attached Files
    Last edited by Kabouik; Apr-22-2019 at 20:29.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •