Page 17 of 18 FirstFirst ... 715161718 LastLast
Results 481 to 510 of 538

Thread: Show us your cockpit

  1. #481
    Supporting Member QB.Creep's Avatar
    Join Date
    May 2017
    Location
    Baltimore, MD
    Posts
    221
    Post Thanks / Like
    Total Downloaded
    205.55 MB

    Re: Show us your cockpit

    Stasche - this is unreal dude. I showed my wife just to get her reaction and it was about what I expected - the threat of divorce if I even think about attempting something like that haha!!

    Well done!!

  2. Likes farley, sw1ive liked this post
  3. #482
    Ace sw1ive's Avatar
    Join Date
    Feb 2013
    Location
    Hellas Athenss
    Posts
    1,020
    Post Thanks / Like
    Total Downloaded
    951.63 MB

    Re: Show us your cockpit







  4. Likes farley, ATAG_Pattle, ♣_Spiritus_♣ liked this post
  5. #483
    Team Fusion
    Join Date
    Sep 2016
    Location
    USA
    Posts
    711
    Post Thanks / Like
    Total Downloaded
    497.6 KB

    Re: Show us your cockpit

    New Huey setup. Been whittling away at it for a few months now and finally got it running. Landed the stormy ship landing mission on hard.

    -Z

    Attached Images Attached Images

  6. #484
    Ace 1lokos's Avatar
    Join Date
    Jan 2012
    Posts
    5,323
    Post Thanks / Like
    Total Downloaded
    1.04 GB

    Re: Show us your cockpit

    Quote Originally Posted by sw1ive View Post
    Nice craftsmanship, but... metacenter seems high, no risk of "capsize"?
    Last edited by 1lokos; Jul-20-2019 at 12:47.

  7. Likes sw1ive liked this post
  8. #485
    Combat pilot Nails's Avatar
    Join Date
    Jan 2013
    Location
    RAF Rudloe Manor, Wiltshire
    Posts
    144
    Post Thanks / Like
    Total Downloaded
    121.58 MB

    Re: Show us your cockpit

    Quote Originally Posted by LuseKofte View Post
    Nails, I can see you have upradet your cadet stick to a Spitsim stick with rudder pedals. I was going to buy it myself but went for a chopper setup instead. Magnificent setup you got there
    LuseKofte me old mukah! I did go the SpitSim way, but one does need, deep pockets.

    I still play CoD, and still patiently waiting for TF 5.0 (I was a young father when 5.0 was originally touted, I'm going to be a Grandad next week)!

    Cliffs has not been the same since ACG all buggered off to BoM, BoS. Shit happens eh?

  9. Likes sw1ive liked this post
  10. #486
    Supporting Member
    Join Date
    Nov 2015
    Location
    Oak Island, NC
    Posts
    790
    Post Thanks / Like
    Total Downloaded
    80.50 MB

    Re: Show us your cockpit

    Trying out a new switch panel. Not sure about these switches yet. They are miniature switches that I ordered with long levers and 12mm barrels so they look like full-size switches, but don't have much throw. I have some full-size switches on order to try out as well.

    I am thinking of offering this complete switch panel for DIY cockpit builders while I continue working on my full cockpit controls. It would be made of black plastic, with 18 SPDT switches providing 36 inputs, have a USB joystick controller with cable, and connectors on the back for optionally adding up to 8 analog axes later. I'd leave the front of the panel without mounting holes, so the user could drill them wherever they wanted, or even use another method to attach it to their cockpit, like glue.
    I'd make available an Inkscape drawing that can be easily customized in order to print a label that could be placed over the panel once the user has buttons assigned. I'm thinking they could print onto sticky full sheet label stock for a permanent switch assignment, or print onto card stock so the label could be easily switched out when changing planes.

    Here are a few views of the prototype... I 3D printed the panel and the holder for it for test purposes, but the actual panel will be made of black resin, and of course the panel would be recessed into a cutout on the cockpit builders instrument panel or side board or whatever. I made a quick PC board for it on my CNC mill, but the end product will have a regular PCB.

    IMG_20190804_152630697_compress60.jpg IMG_20190805_144406870_compress91.jpg IMG_20190805_144417741_compress7.jpg
    Windows 10 Pro 64-bit
    AMD Ryzen 7 3700X 8-Core, 16-Thread
    32GB RAM
    NVidia GeForce GTX1080 (Asus Rog Strix GTX 1080)
    1 TB SSD
    LG 4K 55" TV
    Gear-Falcon General Purpose Joystick Controller, Gear-Falcon Quadrant and Trim, Gear-Falcon BF-109 Water Radiator Crank

    "Find out what you don't do well, and then DON'T DO IT!" - Alf

  11. #487
    Supporting Member
    Join Date
    Nov 2015
    Location
    Oak Island, NC
    Posts
    790
    Post Thanks / Like
    Total Downloaded
    80.50 MB

    Re: Show us your cockpit

    Here are a couple pictures of the quick-swap label bezels. I'll have these made up in thin steel, and have to option to glue a couple magnets onto the main bezel. The user can print up control labels for multiple cockpit configurations, stick them onto the quick-swap bezels, then swap out the bezels and load different control settings when they change planes.



    IMG_20190806_130333682_compress54.jpg IMG_20190806_130347114_compress50.jpg
    Windows 10 Pro 64-bit
    AMD Ryzen 7 3700X 8-Core, 16-Thread
    32GB RAM
    NVidia GeForce GTX1080 (Asus Rog Strix GTX 1080)
    1 TB SSD
    LG 4K 55" TV
    Gear-Falcon General Purpose Joystick Controller, Gear-Falcon Quadrant and Trim, Gear-Falcon BF-109 Water Radiator Crank

    "Find out what you don't do well, and then DON'T DO IT!" - Alf

  12. Likes ATAG_Snapper, ATAG_Pattle, Nails, sw1ive liked this post
  13. #488
    Veteran Combat pilot
    Join Date
    Jun 2015
    Location
    Nebraska, USA
    Posts
    265
    Post Thanks / Like
    Total Downloaded
    355.85 MB

    Re: Show us your cockpit

    I started feeling guilty about how little I had contributed but how much I had absorbed from everyone here and the projects they had shared, so I finally snapped a few pics of the project I threw together with quite a bit of guidance from Sokol and Mr Highseas (and a ton of inspiration from everyone here!). I am a cheap ass where I can be so I ended up just building me and the Mrs. a couple desks from pipe fittings and wood from the local home improvement store. This allowed me to fit things exactly into the space I had where I needed them and still able to tuck out of the way when not in use.


    20200112_204609.jpg
    Stowed

    20200112_204513.jpg
    Ready to go

    20200112_014341.jpg
    I built the button box from wood and sheet metal and ended up buying the electronics inside. It may not have been the most cost effective (switches/pots/Arduino were probably $125 or better) but was a huge learning project and ended up being quite a bit of fun once I figured things out. I probably should have had some PCBs made but ended up doing 2 shift register boards and the Arduino mainboard just with busboard material.
    I would have loved to be able to get a couple different lights and such working but was purely exhausted by the time I muddled myself through learning everything else so figured …. maybe later lol

    20200112_150639.jpg
    Last xmas the wife got me one of the surplus cockpit lamps used in spits and multiple other planes. It was immediately rewired and put into service!

    Thank you all for being such a welcoming community.

  14. #489
    Supporting Member
    Join Date
    Nov 2015
    Location
    Oak Island, NC
    Posts
    790
    Post Thanks / Like
    Total Downloaded
    80.50 MB

    Re: Show us your cockpit

    So my Saitek Cyborg Gold is showing it's age... bought it in 2002 and have been using it ever since. Lately it has been getting pretty loose and sloppy, so I took it apart and tightened some stuff up, which helped a lot. Last week it started having some bad spikes in the Y axis... my aim is bad enough without that, so I am on a quest to get a new joystick set up.
    IMG_20200116_153240708_compress73.jpg

    I had my wife buy me a PXN "Vibration feedback" joystick on Amazon for Christmas, which I assumed was force-feedback. Tried it out, and while it was not horrible as a plain joystick, I could not get the "Vibration feedback" to work at all, even after downloading the latest drivers from their web site. The buttons were very stiff to push, and I decided it just wasn't worth the money, so I sent it back.

    Fast forward to this week... I bought a Logitech Extreme 3D Pro on Amazon. Looks like a well-made joystick, maybe I can get used to it. The action is pretty stiff...I had a test flight and found the spring was so tight, and the "throw" was so short it was hard to make small gentle movements in flight. Every move I made really jerked the plane around, and I had a lot of trouble aiming. Even more of a problem... the base is VERY wide. I suppose that is great if you are putting it on a desktop and don't want it to move around. Problem is, I put the joystick on a pedestal between my legs, and this one is so wide that I have to spread my knees uncomfortably wide to get it in there.
    I thought I'd kill two birds with one stone, as it were. I decided to add an extension onto the shaft so I can place the base on the floor, as I have seen others do. I don't care about the extra buttons or axis on the base, so it doesn't matter that i won't be able to reach them. I'm going to start with a 20" shaft, that should put the joystick at about the same height I have it now, as well as giving me me lots of travel to smooth out the movement (and reduce the amount of felt stiffness from the spring). If it is too much travel, so I have to move the stick too much, I can always easily shorten the shaft and just raise the base off the floor a commensurate amount until I get it just right. The only other thing that might be a problem is that with the extra leverage afforded by the extended shaft it might be easy to over-travel without realizing it, and break something. I have an idea for a kind of ring that will go above the base to prevent over-travel. I don't care about the "Twist" axis on the joystick, as I have rudder pedals, so I can disregard worrying about trying to make that work, and just removed the potentiometer for that function.

    I cut a 20" piece of gray PVC outdoor electrical conduit to use as a shaft, and spent a couple hours with my calipers devising some adapters that I can 3D print to attach the shaft to the base and handle. Started to print them out last night, but a part on my 3D printer extruder assembly broke partway through and ruined the adapters. I glued the broken extruder part back together, and it lasted long enough to print a replacement part. The partially printed adapters were far enough along that I was able to test fit and function, and allowed me to make some adjustments to my models. I'm printing the revised adapters as we speak, so should be able to test it out this evening.

    IMG_20200116_104621576_compress34.jpg IMG_20200116_104709819_compress20.jpg SpaceClaim_2020-01-16_10-45-27.png

    Wish me luck!

    Kendy
    Last edited by Kendy for the State; Jan-16-2020 at 16:51.
    Windows 10 Pro 64-bit
    AMD Ryzen 7 3700X 8-Core, 16-Thread
    32GB RAM
    NVidia GeForce GTX1080 (Asus Rog Strix GTX 1080)
    1 TB SSD
    LG 4K 55" TV
    Gear-Falcon General Purpose Joystick Controller, Gear-Falcon Quadrant and Trim, Gear-Falcon BF-109 Water Radiator Crank

    "Find out what you don't do well, and then DON'T DO IT!" - Alf

  15. Likes ATAG_Oskar, ATAG_Hawk, farley, sw1ive liked this post
  16. #490
    ATAG Member ATAG_Hawk's Avatar
    Join Date
    Dec 2015
    Location
    West Yorkshire England UK.
    Posts
    368
    Post Thanks / Like
    Total Downloaded
    2.42 MB

    Re: Show us your cockpit

    Great work Kendy. I shall be watching your progress with interest.

    I have a Thrustmaster T Flight Hotas which I have had for about eight years. It is as solid as a rock. I have thought about changing it for a fancier joy stick but hell it works great for me so I am sticking with it.

    Keep up the good work.

    Vickers Wellington Mk1c. OJ-F P2517 'F for Freddie' of No.149 Squadron, star of 'Target for Tonight' directed by Harry Watt released in July 1941.

    Freddy prepares for an air test prior to departure from Ford on ops with No.149 Squadron for a daring daylight attack on Marshalling Yards in Caen France 31\1|21. ATAG Operation Milk Run. Target destroyed. Six Wellingtons, One Blenheim together with
    their Spitfire escort returned safely. One Wellington crashed on landing at Ford.

  17. Likes sw1ive liked this post
  18. #491
    Supporting Member
    Join Date
    Nov 2015
    Location
    Oak Island, NC
    Posts
    790
    Post Thanks / Like
    Total Downloaded
    80.50 MB

    Re: Show us your cockpit

    All done! Took a few tries on the printer..I usually print in PLA, as it doesn't warp when it cools, but it is more hard and brittle than ABS, but ABS is stronger, so I figured I'd do it in ABS. Had to play around with the settings for ABS until I got it just right, so ended up printing 3 times before I got some parts that worked. Put it all together and clamped it down, then realized it was a little too tall, so took it apart and cut a couple inches off the shaft. Put it back together, moved the base forward about 4 inches, and calibrated. Feels really good, "throw" is an order of magnitude more than with the original stick, so it should really smooth out my flying. Maybe I'll be able to hit something now!

    IMG_20200116_220015690_compress86.jpg IMG_20200116_220100178_compress66.jpg IMG_20200117_101802235_compress0.jpg IMG_20200117_102357026_compress5.jpg IMG_20200117_110514721_compress51.jpg
    Windows 10 Pro 64-bit
    AMD Ryzen 7 3700X 8-Core, 16-Thread
    32GB RAM
    NVidia GeForce GTX1080 (Asus Rog Strix GTX 1080)
    1 TB SSD
    LG 4K 55" TV
    Gear-Falcon General Purpose Joystick Controller, Gear-Falcon Quadrant and Trim, Gear-Falcon BF-109 Water Radiator Crank

    "Find out what you don't do well, and then DON'T DO IT!" - Alf

  19. #492
    Supporting Member
    Join Date
    Nov 2015
    Location
    Oak Island, NC
    Posts
    790
    Post Thanks / Like
    Total Downloaded
    80.50 MB

    Re: Show us your cockpit

    Took a test flight and found there is too much throw on the stick...it takes a LOT of movement to get a little reaction out of the controls. I took another 6" off the shaft, and built a platform to raise the base 6". Flew last night for a bit. Set the sensitivity on the axes to maximum, removed the dead zone from the elevators and set it to .01 on the ailerons. Still takes quite a bit of movement, but not as bad as before. My muscle memory is used to very little movement, so maybe it will just take time. it's harder to follow planes when they make violent maneuvers, as I'm just not used to moving the stick so much. On the other hand, I find my aim is better. I'll run this way for a couple days before I decide if I want to shorten it some more.

    IMG_20200117_162503564_compress17.jpg IMG_20200117_171740905_compress87.jpg IMG_20200117_171748167_compress41.jpg
    Windows 10 Pro 64-bit
    AMD Ryzen 7 3700X 8-Core, 16-Thread
    32GB RAM
    NVidia GeForce GTX1080 (Asus Rog Strix GTX 1080)
    1 TB SSD
    LG 4K 55" TV
    Gear-Falcon General Purpose Joystick Controller, Gear-Falcon Quadrant and Trim, Gear-Falcon BF-109 Water Radiator Crank

    "Find out what you don't do well, and then DON'T DO IT!" - Alf

  20. #493
    Ace sw1ive's Avatar
    Join Date
    Feb 2013
    Location
    Hellas Athenss
    Posts
    1,020
    Post Thanks / Like
    Total Downloaded
    951.63 MB

    Re: Show us your cockpit

    .

    Hello... here is a video link with HOMEMADE FULLMOTION COCKPIT WITH VR GOOGLES...




    .

  21. Likes IIJG27Rich, ATAG_Pattle, farley liked this post
  22. #494
    Novice Pilot =Devlin='s Avatar
    Join Date
    Apr 2017
    Location
    Northern Ireland
    Posts
    82
    Post Thanks / Like
    Total Downloaded
    508.11 MB

    Re: Show us your cockpit

    Making the most of being stuck in the house and gave the cockpit a revamp
    SimPit (1) (Copy).JPG
    SimPit (2) (Copy).JPG
    SimPit (3) (Copy).JPG
    SimPit (4) (Copy).JPG
    SimPit (5) (Copy).JPG

  23. #495
    Supporting Member
    Join Date
    Nov 2015
    Location
    Oak Island, NC
    Posts
    790
    Post Thanks / Like
    Total Downloaded
    80.50 MB

    Re: Show us your cockpit

    Quote Originally Posted by =Devlin= View Post
    Making the most of being stuck in the house and gave the cockpit a revamp
    Love what you did with the keyboard...looks great!
    Windows 10 Pro 64-bit
    AMD Ryzen 7 3700X 8-Core, 16-Thread
    32GB RAM
    NVidia GeForce GTX1080 (Asus Rog Strix GTX 1080)
    1 TB SSD
    LG 4K 55" TV
    Gear-Falcon General Purpose Joystick Controller, Gear-Falcon Quadrant and Trim, Gear-Falcon BF-109 Water Radiator Crank

    "Find out what you don't do well, and then DON'T DO IT!" - Alf

  24. #496
    Combat pilot Little Bill's Avatar
    Join Date
    Apr 2018
    Location
    West Coast, USA
    Posts
    191
    Post Thanks / Like
    Total Downloaded
    465.46 MB

    Re: Show us your cockpit

    Devlin thanks for posting. Every time someone makes a new post here I enjoy looking through the old posts and again seeing what some of you guys are able to do. If you do not mind I would like to ask you a couple of questions... Does the compass on your throttle actually work? And what did you use to label your keyboard? I don't dare turn my keyboard upside down and label the keys as you did, as my wife also use it for normal PC things, but I want to put some little labels on my Warthog Throttle controls. Thanks again for posting S`

    I7 12700K @ 4.8Ghz|RTX 3080Ti|32GB DDR4|1TB NvMe l LG OLED 48”TV|1440P @120Hz|VKB STECS l VKB Gunfighter III/100mm extension l MFG V3 Pedals l Falcon Gear Quadrant l TIR 5 l Cloud X Headphone|Widows 11, C:\Program Files (x86)Steam\steamapps\common\IL-2 Sturmovik Cliffs of Dover Blitz|20Mbs dl, 2Mbs ul

  25. Likes sw1ive liked this post
  26. #497
    Novice Pilot =Devlin='s Avatar
    Join Date
    Apr 2017
    Location
    Northern Ireland
    Posts
    82
    Post Thanks / Like
    Total Downloaded
    508.11 MB

    Re: Show us your cockpit

    Thanks Bill, the compass is just cosmetic but the keyboard setup is fairly simple. If you have second USB keyboard you can make one as windows can handle having two connected. I just printed the the labels on card and hot glued them on and set up the proper assignments, its a lot easier than trying to remember all the buttons. Build a simple mount to prop it and your good to go. I'll attach the layout below and if you want the illustrator file so you can customize it yourself just let me know

    ATAG keyboard 2.jpg

  27. Likes farley, sw1ive liked this post
  28. #498
    Combat pilot Little Bill's Avatar
    Join Date
    Apr 2018
    Location
    West Coast, USA
    Posts
    191
    Post Thanks / Like
    Total Downloaded
    465.46 MB

    Re: Show us your cockpit

    Thanks, very clever.

  29. Likes sw1ive liked this post
  30. #499
    Ace sw1ive's Avatar
    Join Date
    Feb 2013
    Location
    Hellas Athenss
    Posts
    1,020
    Post Thanks / Like
    Total Downloaded
    951.63 MB

    Re: Show us your cockpit

    .


    SimPit (4) (Copy).JPG


    Thanks Devlin, your cockpit (buttonbox-Keyboard) is well-constructed construction .
    and, I like blue leds over the (upside-down) keyboard


    I remember my first cockpit was (all an the desk) without TrackIR
    tracking with trackball mouse.


    IMG_4754.jpg IMG_4755.jpg


    and, I remember my no3 cockpit with blue leds
    Yoke for bombers and joystick for Fighters


    IMG_3505.jpg IMG_3495.jpg


    today I am on no6 cockpit !!!


    same links with keyboards modifys...





    .

  31. #500
    Supporting Member
    Join Date
    Nov 2015
    Location
    Oak Island, NC
    Posts
    790
    Post Thanks / Like
    Total Downloaded
    80.50 MB

    Re: Show us your cockpit

    One thing I have to ask you folks with the modified keyboards...I don't think the game (or Windows, for that matter) differentiates between the keyboard you have marked up to use as a control panel, and the regular keyboard. So pressing the letter "a" on your marked up keyboard is the same as pressing the letter "a" on your regular keyboard. How do you type in chat if all the keys are assigned to game functions?


    Quote Originally Posted by sw1ive View Post
    .


    SimPit (4) (Copy).JPG


    Thanks Devlin, your cockpit (buttonbox-Keyboard) is well-constructed construction .
    and, I like blue leds over the (upside-down) keyboard


    I remember my first cockpit was (all an the desk) without TrackIR
    tracking with trackball mouse.


    IMG_4754.jpg IMG_4755.jpg


    and, I remember my no3 cockpit with blue leds
    Yoke for bombers and joystick for Fighters




    IMG_3505.jpg IMG_3495.jpg


    today I am on no6 cockpit !!!


    same links with keyboards modifys...





    .
    Windows 10 Pro 64-bit
    AMD Ryzen 7 3700X 8-Core, 16-Thread
    32GB RAM
    NVidia GeForce GTX1080 (Asus Rog Strix GTX 1080)
    1 TB SSD
    LG 4K 55" TV
    Gear-Falcon General Purpose Joystick Controller, Gear-Falcon Quadrant and Trim, Gear-Falcon BF-109 Water Radiator Crank

    "Find out what you don't do well, and then DON'T DO IT!" - Alf

  32. Likes sw1ive liked this post
  33. #501
    Novice Pilot =Devlin='s Avatar
    Join Date
    Apr 2017
    Location
    Northern Ireland
    Posts
    82
    Post Thanks / Like
    Total Downloaded
    508.11 MB

    Re: Show us your cockpit

    Very nice sw1ive , great setup, this is about Version 4 LOL. I had to add the lights after I made it as with the room lights out i couldnt see the buttons. The flightstick and throttle tuck in behind the keyboard too so I can slide it out of the way when not in use.


    Quote Originally Posted by Kendy for the State View Post
    One thing I have to ask you folks with the modified keyboards...I don't think the game (or Windows, for that matter) differentiates between the keyboard you have marked up to use as a control panel, and the regular keyboard. So pressing the letter "a" on your marked up keyboard is the same as pressing the letter "a" on your regular keyboard. How do you type in chat if all the keys are assigned to game functions?
    Once your in chat the letter keys have preference so no problems

  34. Likes sw1ive liked this post
  35. #502
    Supporting Member
    Join Date
    Nov 2015
    Location
    Oak Island, NC
    Posts
    790
    Post Thanks / Like
    Total Downloaded
    80.50 MB

    Re: Show us your cockpit

    Quote Originally Posted by =Devlin= View Post
    Very nice sw1ive , great setup, this is about Version 4 LOL. I had to add the lights after I made it as with the room lights out i couldnt see the buttons. The flightstick and throttle tuck in behind the keyboard too so I can slide it out of the way when not in use.




    Once your in chat the letter keys have preference so no problems
    Oh, right... I guess I knew that. Sorry,stupid question!
    Windows 10 Pro 64-bit
    AMD Ryzen 7 3700X 8-Core, 16-Thread
    32GB RAM
    NVidia GeForce GTX1080 (Asus Rog Strix GTX 1080)
    1 TB SSD
    LG 4K 55" TV
    Gear-Falcon General Purpose Joystick Controller, Gear-Falcon Quadrant and Trim, Gear-Falcon BF-109 Water Radiator Crank

    "Find out what you don't do well, and then DON'T DO IT!" - Alf

  36. Likes sw1ive liked this post
  37. #503
    ATAG Member ATAG_Highseas's Avatar
    Join Date
    Feb 2016
    Location
    Peurto del Slade, UK
    Posts
    6,445
    Post Thanks / Like
    Total Downloaded
    571.41 MB

    Re: Show us your cockpit

    Quote Originally Posted by PhoenixCNE View Post
    That is Awesome !

    - ASUS ROG MAXIMUS Z790 HERO - i9-13900k - ASUS ROG STRIX RTX 4090 OC - 32GB Corsair Dominator Platinum DDR5 5600MHz -
    - CORSAIR 1200w HX Series PSU - Corsair H100x Hydro Series CPU Cooler -
    - Big Screen Beyond -

    - Virpil T50 Mongoos Flight Stick -
    - TM Warthog Throttle -
    - Slaw Device 109 Cam Rudder Pedals -

    Highseas Peripherals
    - Engine Switch Panel - Munitions Switch Panel - Throttle Quadrant Trim Box - Helicopter Collective - Analogue Brake Lever -


    Operated by a 1972 Standard Issue Talking Monkey

  38. #504
    Supporting Member LuseKofte's Avatar
    Join Date
    Jan 2013
    Location
    Norway
    Posts
    2,394
    Post Thanks / Like
    Blog Entries
    1
    Total Downloaded
    46.2 KB

    Re: Show us your cockpit

    I was to upgrade my pit with a new yoke due to the incoming TF 5.0 and Wellington, The currency working against me wanting a YOKO Yoke
    yoko_1024x831_logo_STAY-600x487.png
    I had to do with a Honeycomb yoke for now
    Alpha-Flight-Controls.jpg

    But it turned out to be a very good buy, For combat sim the pushbuttons are a bit misplaced. reviews put it second to YOKO on movement and smoothness and above for buttons. So my yoke stick setup looks like this
    91798192_3377850425576709_73495037987520512_n.jpg91894574_3377849965576755_2404696221311565824_n.jpg

    So if this had a Yoko yoke I would personally think it I have the perfect Chopper/Wellington/P40/Wildcat/JU88 pit. Honeycomb is quite good though with 90 degree turn both ways= 180 degree and adequate push pull pitch
    Last edited by LuseKofte; Apr-03-2020 at 09:17.

  39. #505
    Combat pilot Nails's Avatar
    Join Date
    Jan 2013
    Location
    RAF Rudloe Manor, Wiltshire
    Posts
    144
    Post Thanks / Like
    Total Downloaded
    121.58 MB

    Re: Show us your cockpit

    I was working out how I could get this beautiful replica home, so I could fit my instrument panel in it! Picture taken at the Battle of Britain Memorial, Caple Le Ferne, Kent. Last year!

    Stay safe you lot!



    Last edited by Nails; Apr-04-2020 at 10:40. Reason: Added Location

  40. #506
    Combat pilot Nails's Avatar
    Join Date
    Jan 2013
    Location
    RAF Rudloe Manor, Wiltshire
    Posts
    144
    Post Thanks / Like
    Total Downloaded
    121.58 MB

    Re: Show us your cockpit

    I've also added the SpitSim full size controller/pedals - You need very deep pockets if you go down this route unfortunately.




  41. #507
    Combat pilot Nails's Avatar
    Join Date
    Jan 2013
    Location
    RAF Rudloe Manor, Wiltshire
    Posts
    144
    Post Thanks / Like
    Total Downloaded
    121.58 MB

    Re: Show us your cockpit

    Since I cobbled this together, the Oil & Fuel pressure gauges have been replaced with working ones. The control column is a full sized spade grip with rudder pedals.


  42. #508
    Team Fusion
    Join Date
    Sep 2016
    Location
    USA
    Posts
    711
    Post Thanks / Like
    Total Downloaded
    497.6 KB

    Re: Show us your cockpit

    Heya'll. Long time no see.
    Long story short...have put the spit simpit on the side for a bit. Took my boys to the aircraft salvage yard nearby and dragged home a Cessna Aerobat fuselage. With coronacopalypse at hand, I've had ample time to weld up some skids for a dual control heli conversion.
    The controls will be modeled after the OH58d Kiowa (coming out soon in DCS). For the collective, I have also been working on some of my own switches, as the Otto ones are $80 a pop and are plastic (meh). Currently working on an internal throttle mechanism.

    ~S~



    Attached Images Attached Images

  43. #509
    Combat pilot Nails's Avatar
    Join Date
    Jan 2013
    Location
    RAF Rudloe Manor, Wiltshire
    Posts
    144
    Post Thanks / Like
    Total Downloaded
    121.58 MB

    Re: Show us your cockpit

    Quote Originally Posted by 69th_Zeb View Post
    Heya'll. Long time no see.
    Long story short...have put the spit simpit on the side for a bit. Took my boys to the aircraft salvage yard nearby and dragged home a Cessna Aerobat fuselage. With coronacopalypse at hand, I've had ample time to weld up some skids for a dual control heli conversion.
    The controls will be modeled after the OH58d Kiowa (coming out soon in DCS). For the collective, I have also been working on some of my own switches, as the Otto ones are $80 a pop and are plastic (meh). Currently working on an internal throttle mechanism.

    ~S~



    Bloody hell Zeb - Deep pockets!

  44. #510
    Combat pilot Nails's Avatar
    Join Date
    Jan 2013
    Location
    RAF Rudloe Manor, Wiltshire
    Posts
    144
    Post Thanks / Like
    Total Downloaded
    121.58 MB

    The wife has a go ....

    The wife has a go - ATA delivering Hawker Hurricane from Northolt to Tangmere!


Page 17 of 18 FirstFirst ... 715161718 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •