Here is a short tutorial on how to set up your Teamspeak:
Note: You need a microphone to be able to speak, but you do not need a microphone in order to listen to people talking.
1) Install teamspeak from here
http://www.teamspeak.com/?page=downloads
I have Windows 7 and a 64 bit version, so make sure you select the appropriate version for your operating system.
2) Once Teamspeak is installed, open it and check the upper menu tabs. You should find a tab called "Bookmarks" right next to the "Connections" tab. Click on "Manage Bookmarks" in the scrolldown menu.
3) You should see a small window that pops up called "Bookmarks". Click on the "Add Bookmark" button on the upper-left section of the blue bar.
4) Enter "ATAG SERVER" in the label textbox, enter "216.52.148.29:9987" in the "Address" textbox (this is the IP address of the ATAG teamspeak server) and enter the nickname you want to appear in the Teamspeak in the "Nickname" textbox.
5) Click "Apply" and "OK" and you will be brought back to the main Teamspeak window.
6) If you want to join the teamspeak server now using the Bookmark you just set up, you just have to click on "Bookmarks" in the upper tabs.
7) You should appear in the main lobby. Just click OK on the "Host Message" window that pops up. You should appear in the "Ready Room" channel.
8) In order to move to other channels, just double-click with the left mouse button on the channel you want to go to. You will see different users marked as blue circles and different channels marked as grey or yellow rectangles.
And that's pretty much it! Every time you want to join teamspeak, just follow steps 6 to 8 and you'll be good to go.
Bookmarks